Voltcraft CO-100 Room Air Meter CO-100 Datenbogen

This function resets the CO

2

 meter to factory settings.

¼

Not only the threshold value settings, but also basic calibration is reset.

All 48 data memory slots (see chapter 9 g) are also deleted.

• Briefly press the „MODE“ button repeatedly (from the normal operating mode) until

„RcFS“ flashes on the display („RcFS“ = Recover the Factory Settings“).

• Briefly press the button „ENTER“; the top display line shows „NO“.

• Select between „NO“ and „YES“ using the arrow buttons „“ or „“.

„NO“ = do not reset

„YES“ = Reset to default settings

• Briefly press the „ENTER“ button.

If you selected „NO“, the CO

2

 meter returns to normal display without resetting factory

settings.

Selecting „YES“ resets all settings to factory settings and deletes all 48 data memory
slots. Then the CO

2

 meter returns to normal display.