Testo 882 , 33 Hz thermography camera, -20 to +350 °C, 320 x 240 pix bolometer matrix 0560 0882 Benutzerhandbuch
Produktcode
0560 0882
6 Using the product
32
- The selected setting is highlighted orange ( ).
4. Move
4. Move
Joystick
up/down to change the setting.
5.
Confirm the entry with
[OK]
.
6.
Confirm the settings with
Apply
.
Optics...
The lenses adjusted to the instrument are shown. Only the lenses
that are shown may be used.
The high-temperature filter registered in the instrument is shown.
With use of another high-temperature filter, the specified accuracy
is not ensured.
>
The lenses adjusted to the instrument are shown. Only the lenses
that are shown may be used.
The high-temperature filter registered in the instrument is shown.
With use of another high-temperature filter, the specified accuracy
is not ensured.
>
[OK]
|
Configuration…
|
[OK]
|
Optics…
|
[OK]
.
Using the
Protection glass
option, you can set whether an infrared
protection glass is used or not. Ensure the correct setting to
prevent corruption of the measurement results.
prevent corruption of the measurement results.
> Press
[OK]
to activate (
) or deactivate (
) the
Protection
glass
option.
- With the option activated, the protection glass symbol (
) is
shown in the bottom right of the display.
Power-save options…
Options can be set to extend the rechargeable battery running time.
1.
Options can be set to extend the rechargeable battery running time.
1.
[OK]
|
Configuration…
|
[OK]
|
Power-save options…
|
[OK]
.
- The
Power-save options
dialogue is opened.
2. Move
Joystick
up/down to select the desired option.
- The selected option has an orange border ( ).
3.
3.
Confirm the selection with
[OK]
.
-
LCD backlight
: The selected setting is highlighted orange and
can be changed ( ).
> Move
Joystick
up/down to change the setting. Confirm the
entry with
[OK]
.
-
Switch off LCD
or
Power off imager
: The selected option can
be activated or deactivated.
> Press
[OK]
to activate (
) or deactivate (
) the function.
- With the option activated, the length of time until shut-down
can be set.