Helios Preisser DIGI-MET® Instrument 1726 502 Reading range(s) 12.5 mm Reading 0,001 mm Accuracy 0,005 mm 1726 502 Datenbogen
Produktcode
1726 502
10
UsbCom Standard / Professional 2.1
©
Software
5. Parameterize Measuring Devices
5.1 MC-I Switch
The MC-I Cable is fitted on one end with a jack bush so that it can connected to a relay (e.g. foot switch) with
a jack plug (according to JIS C 6560, 3.5 mm), thus multiple foot switches can be assigned via a USB hub to
control individual or multiple measuring devices.
a jack plug (according to JIS C 6560, 3.5 mm), thus multiple foot switches can be assigned via a USB hub to
control individual or multiple measuring devices.
•
Connection:
Description of the connected data cable (e.g. MC-I)
•
Instrument:
Description of the connected device (e.g. switch)
•
Description:
A more detailed description can be entered (e.g. foot switch) in order
to clearly identify the switch
•
Measurements per Cycle:
Enter the number of measurements per cycle for example: when you enter 3, the
foot switch must be operated 3 times before a cycle can begin, this is important to
the allocation of the measuring devices.
Example:
If by „Measurements per cycle“ 3 is entered and by the parameterize measuring
device (see 5.2) the 2 Data Request via,“ MC-I Switch is selected, the appropriate
switch and the option „with Measurement No. 2“, then every second time (2 times)
the foot switch is operated a measured value will be transferred in the cycle. The
first and third (1 and 3) activation of the device, no value will be transferred, here
another device could be allocated.
•
With measuring devices were the „Measurement No. 1“ and „Measurement No. 3“ are allocated, the
first and third activation of the foot switch these measured values will be transferred.
Note:
Please make sure that when entering „Measurements per cycle“ and „with
Measurement No.“ that in the parameter window the measuring devices
correspond logically. For example, do not „with Measurement No“ enter 5, while by
„Measurements per cycle“ only 3 has been entered.
•
Actual Measurement No:
Here the actual status of the cycle is shown, if necessary one can skip to a certain
point in the cycle.
MC-I Cable
Foot switch