Leica Microsystems 30 x 10450310 10450310 Datenbogen

This assembly sheet does not replace the complete manual 

on provided CD (i.e. LED illumination installation).

Note: For safety reasons, it is highly recommend that two 
people assemble the column to the base plate. One person 

should hold the base plate securely on a non-skid surface, 

while the second person attaches the column to the base.

Insert horizontal arm into the cross joint 

observing the flattening of the arm and 

orientation of joint according to image.

Tighten allen screw connecting column 

to base. Attention: washer must be 

placed between base and column.

Take out parts from boxes. Place base 

plate on non skidding surface.

Mount the safety clamp to the column.

One box contains horizontal arm, cross 

joint, safety clamp & tools

Allen key, washer and allen screw

One box contains the base plate.

... and immediately secure the 

instrument with previously removed 

washer and screw.

If necessary connect base plate to 

grounding cable with suitable plug.

Mount the Leica A60 to the horizontal 

arm from below...

Place the cross joint on top of the 

safety clamp on the column and lock 

arm with referring knob. 

Remove allen screw and washer from 

the Leica A60 instrument as shown.