Gw Instek PEL-3111 Electronic Load PEL-3111 Datenbogen
Produktcode
PEL-3111
OPERATION
77
Step Resolution Configuration
There are two different ways to set the set resolution when using
the scroll wheel to edit parameters. Step Mode and Cursor Mode.
Step Mode is the default method. Only one mode can be active at a
time; When one mode is active, the other mode is deactivated.
the scroll wheel to edit parameters. Step Mode and Cursor Mode.
Step Mode is the default method. Only one mode can be active at a
time; When one mode is active, the other mode is deactivated.
Cursor Mode Configuration
Description
Cursor mode allows you to edit the selected
parameter one digit at a time. When editing a
parameter, pressing the scroll wheel determines
which digit is selected. Turning the scroll wheel
will then edit the parameter by the step
resolution of the digit.
parameter one digit at a time. When editing a
parameter, pressing the scroll wheel determines
which digit is selected. Turning the scroll wheel
will then edit the parameter by the step
resolution of the digit.
See the Conventions section on page 41 for
operation details.
operation details.
Operation
1. Press
Main
> Configure[F5] > Next Menu[F4]
> Knob[F2] and set the Status setting is set to
Cursor.
Display
Parallel
Knob
External
Previous
Menu
0.4
CCL Step 0.183575
CCM Step
0.5000
LOAD
RS232
03/Sep/2012
mS
A
A
CRH Step
CCH Step
Status
1.000
Cursor
A
CC
35A
15V
Static
Configure
A Value