Gw Instek GSP-830Spectrum analyzer, spectrum analyzerBandwidth (RBW) 3/30/300 kHz/4 MHz GSP-830 Datenbogen

GSP-830, with much elevation on the frequency domain technology, is positioned as an accurate and powerful tool for RF  measurements 
in the industrial fields. The 3GHz Frequency Band and the low Noise Floor of -117dBm greatly expands the GSP-830 dynamic range to a 
level that meets most of the critical measurement requirements in various market sectors. The high speed signal processing of GSP-830 
not only gives a very fast sweep rate of the spectrum but also plays the role as the engine for powerful measurement capabilities. The Auto 
Measurements of Channel Power, Bandwidth and Phase-Jitter related parameters of a RF system or device could be done with ease. The 
Split-Window enables the dual measurements with dual displays of a signal under two different setting environments. The A B C Traces 
provide three live measurement results, such as Clear & Write, Max Hold, and Average traces, of a signal in the same spectrum at the 
same time. The Go/NoGo function facilitates the fast measurements in the Manufacturing and Component Sourcing fields, whereas the 
Auto Sequence provides a mean to automatically run through a sequence of tests based on the various system settings of  the user's test
routines. 

The remarkable USB features support the Image, Data & Setting storage through flash drive and the direct printout of screen image 
through a color printer. Being an USB Device, GSP-830 can be remotely controlled by PC through the USB OTG port on the rear panel. 
The 6.4" TFT LCD with 640 x 480 resolution enhances the effectiveness of GSP-830 powerful measurements due to its bright, colorful & 
high-resolution display. The Auto-Set function, 10Markers (with 5 pairs) measurement and Multi-Language Menu all together provide 
a very thoughtful user interface. The light-weight & compact design plus DC/Battery power operation give field service engineers the best
portability benefit. 

The optional 9k/120kHz RBW filters plus Average and Quasi-Peak Detections fulfill the demand for EMI Test compliances. The function
of "Peak Table", listing the first ten peaks based on the ranking of either amplitude or frequency, provides EMI Engineers with a very 
convenient tool. With optional preamplifier GAP-801, GSP-830 becomes a very good EMI pre-tester to help electronic designers catch 
potentially critical signals prior to the product EMI certification test. With 3GHz Tracking Generator, GSP-830 well accommodates the 
applications for System & Component characteristic verifications. The optional   1ppm stability and the optional AM/FM Demodulator 
extend the GSP-830 application support to the niche areas. The accessories, such as pre-amplifier, CATV test kit and RLB test kit, are all 
available as GSP-830 options to meet the requirements with various applications.

The free PC software of GSP-830, EagleShot, can be accessed and downloaded from GW Instek website. Through RS-232 or USB 
connection, EagleShot transfers the measurement data from GSP-830 to the PC. Users can print out the data in graphical format directly 
or save them into text file for further data analysis. With EagleShot software, the Limit Line setting on the PC could be done either through 
capturing the setting from GSP-830 or through the Limit Line editing by the user at the PC end. For marking and reading the measured 
signals on the PC screen, users can place markers to the peaks of their interest on the display, as easily as they do on GSP-830.