Fluke 190-102/S 2-channel hand-held oscilloscope, ScopeMeter® 190 series II, hand-held 4025383 Benutzerhandbuch
Produktcode
4025383
Fluke 190 Series II
Users Manual
Users Manual
50
Replaying Step-by-Step
To step through the last scope screens, do the following:
1
REPLAY
From scope mode, open the
REPLAY
menu.
Observe that the trace is frozen
and that
and that
REPLAY
appears at the
top of the screen (see Figure 23).
2
F1
Step through the previous
screens.
screens.
3
F2
Step through the next screens.
Observe that the bottom of the waveform area displays the
replay bar with a screen number and related time stamp:
replay bar with a screen number and related time stamp:
Figure 23. Replaying a Waveform
The replay bar represents all 100 stored screens in
memory. The
memory. The
icon represents the picture being
displayed on the screen (in this example:
SCREEN
-51
). If
the bar is partly white, the memory is not completely filled
with 100 screens.
with 100 screens.
From this point you can use the zoom and cursor functions
to study the signal in more detail.
to study the signal in more detail.