Bender VMD4105-D-2 B93010045 Datenbogen
Produktcode
B93010045
Safety
12
2. 3 General safety instructions
Bender devices are designed and built in accordance with the state of the art
and accepted rules in respect of technical safety. However, the use of such de-
vices may introduce risks to the life and limb of the user or third parties and/
or result in damage to Bender devices or other property.
and accepted rules in respect of technical safety. However, the use of such de-
vices may introduce risks to the life and limb of the user or third parties and/
or result in damage to Bender devices or other property.
Only use Bender equipment:
– as intended
– in perfect working order
– in compliance with the accident prevention regulations and guide-
– as intended
– in perfect working order
– in compliance with the accident prevention regulations and guide-
lines applicable at the location of use
Eliminate all faults immediately which may endanger safety.
Do not make any unauthorised changes and only use replacement
parts and optional accessories purchased from or recommended by
the manufacturer of the equipment. Failure to observe this require-
ment can result in fire, electric shock and injury.
parts and optional accessories purchased from or recommended by
the manufacturer of the equipment. Failure to observe this require-
ment can result in fire, electric shock and injury.
If the device is overloaded by overvoltage or a short-circuit current
load, it must be checked and replaced if necessary.
load, it must be checked and replaced if necessary.
If the device is being used in a location outside the Federal Republic of
Germany, the applicable local standards and regulations must be com-
plied with. European standard EN 50110 can be used as a guide.
Germany, the applicable local standards and regulations must be com-
plied with. European standard EN 50110 can be used as a guide.
Device-specific safety information
Danger of electric shock!
Touching live parts will cause danger of electric shock with fatal
consequences. All work activities on electrical installations as
well as installation activities, commissioning activities and
work activities with the device in operation may only be carried
out by electrically skilled persons!
Touching live parts will cause danger of electric shock with fatal
consequences. All work activities on electrical installations as
well as installation activities, commissioning activities and
work activities with the device in operation may only be carried
out by electrically skilled persons!
After commissioning, the essential settings of the
VMD460-NA have to be protected against unauthorised
changes by a password.
If the password protection is not used, the device has
to be sealed.
VMD460-NA have to be protected against unauthorised
changes by a password.
If the password protection is not used, the device has
to be sealed.