Entes EPC-12 Datenbogen
1
2
PULSE CONCENTRATOR User Manual
EPC-12
EPC-12
WARNING
Ignoring the instructions in this manual may result in serious injuries or death.
Ignoring the instructions in this manual may result in serious injuries or death.
Disconnect all power supply inputs before connecting the device.
Do not remove the front panel when device is connected to the mains.
Do not clean the device with solvents alike. Only clean with dry cloth.
Verify correct terminal connections before energizing the device.
Contact your authorized reseller in case problems occur with your device.
Device is only for rail mounting.
An F Type Fuse must be used and its current limit must be 1 A.
Do not remove the front panel when device is connected to the mains.
Do not clean the device with solvents alike. Only clean with dry cloth.
Verify correct terminal connections before energizing the device.
Contact your authorized reseller in case problems occur with your device.
Device is only for rail mounting.
An F Type Fuse must be used and its current limit must be 1 A.
No responsibility is assured by manufacturer or any of its subsidiaries for any
consequences arising out of disregard the above precautions.
consequences arising out of disregard the above precautions.
SECURITY
Read the User Manual entirely before using the device.
Warnings
Connect a button or a circuit breaker between mains and the device.
Connected button or circuit breaker must be in close proximity of the device.
Connected button or circuit breaker must be marked to indicate that it disconnects the device from
the mains.
Battery life is 5 years at +45°C storing temperature. It is between 8 and 10 years for typical
applications. The battery can only be replaced by ENTES A.Þ. The battery is used to keep the
internal real time clock in case of power outages.
During power outages, the device will not count incoming pulses.
Connected button or circuit breaker must be in close proximity of the device.
Connected button or circuit breaker must be marked to indicate that it disconnects the device from
the mains.
Battery life is 5 years at +45°C storing temperature. It is between 8 and 10 years for typical
applications. The battery can only be replaced by ENTES A.Þ. The battery is used to keep the
internal real time clock in case of power outages.
During power outages, the device will not count incoming pulses.
Standards Applied to the Device
EN 61010-1, EN 62053-31, EN 62054-21
EN 61010-1, EN 62053-31, EN 62054-21
WARRANTY
The device has a 2 (two) year warranty. In case of a fault, the device must only be serviced by
manufacturing company. Otherwise, the warranty of the device will be void.
The device has a 2 (two) year warranty. In case of a fault, the device must only be serviced by
manufacturing company. Otherwise, the warranty of the device will be void.