Lancom Systems 1751 UMTS LS61621/54235100 Benutzerhandbuch
Produktcode
LS61621/54235100
LANCOM 1751 UMTS
Scope of features: as of LCOS version 7.2
Interfaces
WAN: ADSL
ADSL over ISDN compliant with ITU G.992.1 Annex B (compatible to Deutschen Telekom U- R2 connections) or ADSL over POTS
compliant with ITU G.992.1 Annex A
compliant with ITU G.992.1 Annex A
WAN: ADSL2+
ADSL2+ over ISDN compliant with ITU G.992.3, ITU G.992.5 Annex B (ADSL2+) or ADSL2+ over POTS compliant with ITU G.992.3
and ITU G.992.5 Annex A (ADSL2+)
and ITU G.992.5 Annex A (ADSL2+)
WAN: GSM/UMTS
UMTS, HSxPA, GPRS or Edge with integrated UMTS modem
Ethernet ports
4 individual 10/100- Mbps Fast Ethernet ports; up to 3 ports can be switched as additional WAN ports with load balancing
- freely configurable
Each Ethernet port can be freely configured (LAN, DMZ, WAN, monitor port, off). LAN ports can be operated as a switch or
separately. Additionally, external DSL modems or termination routers can be operated as a WAN port with load balancing and
policy- based routing. DMZ ports can be operated with their own IP address range without NAT
separately. Additionally, external DSL modems or termination routers can be operated as a WAN port with load balancing and
policy- based routing. DMZ ports can be operated with their own IP address range without NAT
ISDN
ISDN S0 bus
Serial interface
Serial configuration interface / COM port (8 pin Mini- DIN): 9,600 - 115,000 baud
External antenna connectors
Two SMA antenna connectors for external UMTS antennas (rx diversity) or use of a gps antenna at the aux connector
Management
LANconfig
Configuration program for Microsoft Windows, incl. convenient Setup Wizards. Optional group configuration, simultaneous
remote configuration and management of multiple devices over ISDN dial- in or IP connection (HTTPS, HTTP, TFTP)
remote configuration and management of multiple devices over ISDN dial- in or IP connection (HTTPS, HTTP, TFTP)
LANmonitor
Monitoring application for Microsoft Windows for (remote) surveillance and logging of the status of LANCOM devices and
connections, incl. PING diagnosis
connections, incl. PING diagnosis
Webconfig
Integrated web server for the configuration of LANCOM devices via Internet browsers with HTTPS or HTTP
Access rights
Individual access and function rights for up to 16 administrators
User administration
RADIUS user administration for dial- in access (PPP/PPTP and ISDN CLIP)
Remote maintenance
Remote configuration with Telnet/SSL, SSH (with password or public key), browser (HTTP/HTTPS), TFTP or SNMP, firmware upload
via HTTP/HTTPS or TFTP. A remote configuration for devices behind der LANCOM can be accomplished (after authentication) via
tunneling of arbitrary TCP- based protocols, e.g. for HTTP(S) remote maintenance of VoIP phones or printers of the LAN
via HTTP/HTTPS or TFTP. A remote configuration for devices behind der LANCOM can be accomplished (after authentication) via
tunneling of arbitrary TCP- based protocols, e.g. for HTTP(S) remote maintenance of VoIP phones or printers of the LAN
ISDN remote maintenance
Remote maintenance over ISDN dial- in with calling- number check
Security
Access rights (read/Write) over WAN or (W)LAN can be set up separately (VPN only, Telnet/SSL, SSH, SNMP, HTTPS/HTTP), access
control list
control list
Scripting
Scripting function for batch- programming of all command- line parameters and for transferring (partial) configurations,
irrespective of software versions and device types, incl. test mode for parameter changes
irrespective of software versions and device types, incl. test mode for parameter changes
SNMP
SNMP management via SNMP V2, private MIB exportable by WEBconfig, MIB II
Timed control
Scheduled control of parameters and actions with CRON service
TFTP
TFTP client and server with variable file names (name, MAC/IP address, serial number)
Diagnosis
Extensive LOG and TRACE options, PING and TRACEROUTE for checking connections, LANmonitor status display, internal logging
buffer for SYSLOG and firewall events, monitor mode for Ethernet ports
buffer for SYSLOG and firewall events, monitor mode for Ethernet ports
Firmware update*
Seperate firmware update of the internal UMTS modem possible
*) Note
for future release
Statistics
Statistics
Extensive Ethernet, IP and DNS statistics; SYSLOG error counter
Accounting
Connection time, online time, transfer volumes per station. Snapshot function for regular read- out of values at the end of a
billing period.
billing period.
Export
Accounting information exportable via LANmonitor and SYSLOG
Hardware
Power supply
12 V DC, external power adapter (230 V)
Environment
Temperature range 5–35°C during continuous operation; humidity 0–80%; non- condensing
Housing
Robust synthetic housing, rear connectors, ready for wall mounting, Kensington lock; 210 x 45 x 140 mm (W x H x D)
Power consumption (max)
ca. 10 Watts
Declarations of conformity
CE
EN 60950
Package content
Manual
Printed User Manual (DE, EN) and Quick Installation Guide (DE/EN/FR/ES/IT/PT/NL)
CD
CD with firmware, management software (LANconfig, LANmonitor, LANCAPI) and documentation
Cable
Serial configuration cable, 1.5m
Cable
1 Ethernet cable, 3m