4d Systems 0.96" micro OLED Display SK-96-G2 SK-96-G2 Datenbogen

Produktcode

SK-96-G2

4D SYSTEMS uOLED-96G2

LDE

1. Description

The  uOLED-96G2  is  an  impressive  OLED  display
module  in  the  4D  Systems  microOLED  graphics
display  range.  Featuring  a  0.96”  96x64  resolution
display, it is the ideal size for attractive embedded
display applications.

Driving  the  module  and  its  peripherals  is  the
GOLDELOX  processor,  a  very  capable  chip  which
provides  impressive  graphics  power,  programmed
with  4D  Systems  Workshop  IDE  Software.  4D
Systems Workshop enables graphic solutions to be
constructed rapidly and with ease due to its design
being solely for 4D’s graphics controllers.

The uOLED-96G2 has a modest but comprehensive
range  of  features  suited  for  an  application
requiring  a  bright  eye  catching  display,  an  analog
input,  Dallas  1-wire  sensor  capability,  audio
generation,  or  simply  digital  I/O.  This  is  truly  an
impressive little module.

2. Features

• Low-cost 0.96" OLED display graphics user

interface solution.

• 96 x 64 resolution, RGB 65K true to life colours,

PMOLED Screen.

• No back lighting with near 180° viewing angle.

• Easy 10 pin interface to any host device:

3.3Vout, IO2, GND, IO1, RESET, GND, RX, TX,
+5V, 5V OUT

• Powered by the 4D-Labs GOLDELOX processor

(also available as separate OEM IC)

• 10KB of flash memory for user code storage and

510 bytes of RAM for user variables (255 x 16bit
vars).

• Asynchronous hardware serial UART port with

auto-baud, TTL interface, with 300 to 600K
baud.

• 2 x General Purpose I/O pins.

IO1 supports:

•  Digital I/O
•  A/D Converter with 8/10 bit resolution
•  Complex sound generation
•  Dedicated RTTTL tune engine
•  Multi-Switch Joystick, Buttons
•  Dallas 1-Wire

IO2 supports:

•  Digital I/O
•  Complex sound generation
•  Dedicated RTTTL tune engine
•  Dallas 1-Wire

• On-board micro-SD memory card adaptor for

multimedia storage and data logging purposes.
HC memory card support is also available for
cards larger than 4GB.

• Built in extensive 4DGL graphics and system

library functions.

• Display full colour images, animations, icons and

video clips (no audio support for video).

• Supports all available Windows fonts and

characters (imported as external fonts).

• 4.0V to 5.5V range operation (single supply),

nominal 5.0V.

• Module dimensions: 32.7 x 26.7 x 13.2mm

(including mounting tabs), 4x 2mm holes.

• Weight ~ 5.5g.

• Display Viewing Area: 20.1 x 13.4mm

• RoHS Compliant.