Atmel Evaluation Kit AT91SAM9M10-G45-EK AT91SAM9M10-G45-EK Datenbogen

Produktcode
AT91SAM9M10-G45-EK
Seite von 55
46
SAM9M10 [SUMMARY]
6355ES–ATARM–12-Mar-13
 
10.7
Pulse Width Modulation Controller (PWM)
z
Four channels, one 16-bit counter per channel
z
Common clock generator, providing Thirteen Different Clocks
z
A Modulo n counter providing eleven clocks
z
Two independent Linear Dividers working on modulo n counter outputs
z
Independent channel programming
z
Independent Enable Disable Commands
z
Independent Clock Selection
z
Independent Period and Duty Cycle, with Double Buffering
z
Programmable selection of the output waveform polarity
z
Programmable center or left aligned output waveform
10.8
High Speed Multimedia Card Interface (MCI)
z
Compatibility with MultiMedia Card Specification Version 4.3
z
Compatibility with SD Memory Card Specification Version 2.0
z
Compatibility with SDIO Specification Version V2.0.
z
Compatibility with Memory Stick PRO
z
Compatibility with CE ATA
10.9
USB High Speed Host Port (UHPHS)
z
Compliant with Enhanced HCI Rev 1.0 Specification
z
Compliant with USB V2.0 High-speed and Full-speed Specification
z
Supports Both High-speed 480Mbps and Full-speed 12 Mbps USB devices
z
Compliant with Open HCI Rev 1.0 Specification
z
Compliant with USB V2.0 Full-speed and Low-speed Specification
z
Supports Both Low-speed 1.5 Mbps and Full-speed 12 Mbps USB devices
z
Root Hub Integrated with 2 Downstream USB Ports
z
Shared Embedded USB Transceivers
10.10 USB High Speed Device Port (UDPHS)
z
USB V2.0 high-speed compliant, 480 MBits per second
z
Embedded USB V2.0 UTMI+ high-speed transceiver shared with UHP HS.
z
Embedded 4-KByte dual-port RAM for endpoints
z
Embedded 6 channels DMA controller
z
Suspend/Resume logic
z
Up to 2 or 3 banks for isochronous and bulk endpoints
z
Seven endpoints:
z
Endpoint 0: 64 bytes, 1 bank mode
z
Endpoint 1 & 2: 1024 bytes, 2 banks mode, High Bandwidth, DMA
z
Endpoint 3 & 4: 1024 bytes, 3 banks mode, DMA
z
Endpoint 5 & 6: 1024 bytes, 3 banks mode, High Bandwidth, DMA
10.11 LCD Controller (LCDC)
z
Single and Dual scan color and monochrome passive STN LCD panels supported
z
Single scan active TFT LCD panels supported.