Atmel ATSTK600 500 Starter Kit and Development System. ATSTK600 ATSTK600 Datenbogen
Produktcode
ATSTK600
AVR079
47
8133A-AVR-04/08
13.1 Connect
The sequence of commands and parameters sent from PC front-end to the STK600
in order to connect is listed below.
in order to connect is listed below.
• CMD_SIGN_ON
• CMD_GET_PARAMETER,
• CMD_GET_PARAMETER,
PARAM_HW_VER
• CMD_GET_PARAMETER,
PARAM_SW_MAJOR
• CMD_GET_PARAMETER,
PARAM_SW_MINOR
• CMD_GET_PARAMETER,
PARAM_SW_MAJOR_S1
• CMD_GET_PARAMETER,
PARAM_SW_MINOR_S1
• CMD_GET_PARAMETER,
PARAM_SW_MAJOR_S2
• CMD_GET_PARAMETER,
PARAM_SW_MINOR_S2
13.2 Read Signature
The sequence of commands and parameters sent from PC front-end to the STK600
in order to read the device signature through ISP is listed below. Note that one
already has to be connected to do this.
in order to read the device signature through ISP is listed below. Note that one
already has to be connected to do this.
• CMD_CHECK_STATUS_TGT_CONN
• CMD_ENTER_PROGMODE_ISP
• CMD_READ_SIGNATURE_ISP
• CMD_READ_SIGNATURE_ISP
• CMD_READ_SIGNATURE_ISP
• CMD_LEAVE_PROGMODE_ISP
• CMD_ENTER_PROGMODE_ISP
• CMD_READ_SIGNATURE_ISP
• CMD_READ_SIGNATURE_ISP
• CMD_READ_SIGNATURE_ISP
• CMD_LEAVE_PROGMODE_ISP
13.3 STK600 Communication Logging
For further details and examples of the communication between AVR Studio and
STK600 one can set up logging of all communication to a text file. This can be done
by adding a register key in the Registry as described below.
STK600 one can set up logging of all communication to a text file. This can be done
by adding a register key in the Registry as described below.
1. Open the Registry by running “regedit”:
Figure 13-1. Start regedit from run on the windows menu
2. Browse to the path: HKEY_CURRENT_USER\Software\Atmel\AVRTools\STK500\