Embedded Artists Low-power Application Kit (Oryx) EA-APP-002 EA-APP-002 Datenbogen
Produktcode
EA-APP-002
Low-power Application Kit (Oryx) - User’s Guide
Page 7
Copyright 2012 © Embedded Artists AB
2x5 pos, 50 mil/1.27 mm pitch, standard SWD/JTAG connector
Compact size: 140 x 85 mm
Four layer PCB design for best noise immunity
Embedded JTAG (LPC-LINK) included
Can be completely disconnected (in order not to affect power consumption)
Standard SWD/JTAG connector (2x5 pos) interface connector
2.2 ESD Precaution
Please note that the Low-power Application Board comes without any case/box
and all components are exposed for finger touches – and therefore extra
and all components are exposed for finger touches – and therefore extra
attention must be paid to ESD (electrostatic discharge) precaution.
Make it a habit to always first touch the metal surface of one of the USB
Make it a habit to always first touch the metal surface of one of the USB
connectors for a few seconds with both hands before touching any other
parts of the boards. That way, you will have the same potential as the board
and therefore minimize the risk for ESD.
and therefore minimize the risk for ESD.
Note that Embedded Artists does not replace boards that have been damaged by ESD.
2.3 General Handling Care
Handle the board with care. The board is not mounted in a protective case/box and is not designed for
rough physical handling. Connectors can ware out after excessive use. The board is designed for
evaluation and prototyping use, and not for integration into consumer or industrial end-products.
The Low-power Application Board contains a Memory LCD. Do not exercise pressure on the display
glass area or the flex cable connecting the display to the pcb. That will damage the display.
The Low-power Application Board contains a Memory LCD. Do not exercise pressure on the display
glass area or the flex cable connecting the display to the pcb. That will damage the display.
Note that Embedded Artists does not replace boards where the LCD has been improperly
handled.
2.4 Code Read Protection
The LPC11U37 has a Code Read Protection function (specifically CRP3, see LPC11U37
datasheet/user’s manual for details) that, if enabled, will make the LPC11U37 impossible to reprogram
(unless the user program has implemented such functionality).
Note that Embedded Artists does not replace Low-power Application Boards where the
LPC11U37 has CRP3 enabled. It’s the user’s responsibility to not invoke this mode by accident.
LPC11U37 has CRP3 enabled. It’s the user’s responsibility to not invoke this mode by accident.
2.5 Other Products from Embedded Artists
Embedded Artists has a broad range of LPC1000/2000/3000/4000 based boards that are very low cost
and developed for prototyping / development as well as for OEM applications. Modifications for OEM
and developed for prototyping / development as well as for OEM applications. Modifications for OEM
applications can be done easily, even for modest production volumes. Contact Embedded Artists for
further information about design and production services.
2.5.1
Design and Production Services
Embedded Artists provide design services for custom designs, either completely new or modification to
existing boards. Specific peripherals and I/O can be added easily to different designs, for example,
communication interfaces, specific analog or digital I/O, and power supplies. Embedded Artists has a
broad, and long, experience in designing industrial electronics in general and with NXP’s
broad, and long, experience in designing industrial electronics in general and with NXP’s
LPC1000/2000/3000/4000 microcontroller families in specific. Our competence also includes wireless
and wired communication for embedded systems. For example IEEE802.11b/g (WLAN), Bluetooth™,
ZigBee™, ISM RF, Ethernet, CAN, RS485, and Fieldbuses.