Mikroelektronika MikroE Development Kits MIKROE-1438 Datenbogen
Produktcode
MIKROE-1438
1. Introduction
Once you have soldered the headers your
board is ready to be placed into desired
mikroBUS
board is ready to be placed into desired
mikroBUS
™
socket. Make sure to align the
cut in the lower-right part of the board
with the markings on the silkscreen of
the mikroBUS
with the markings on the silkscreen of
the mikroBUS
™
socket. If all of the pins are
aligned correctly, push the board all
the way into the socket.
3. Plugging the board in
2
3
2. Soldering the headers
1
4. Essential features
Turn the board upward again. Make sure
to align the headers so that they are
perpendicular to the board, then solder the
pins carefully.
to align the headers so that they are
perpendicular to the board, then solder the
pins carefully.
Turn the board upside down to face
its bottom side. Place shorter parts of
the header pins in both soldering pad
locations.
its bottom side. Place shorter parts of
the header pins in both soldering pad
locations.
Before using your click board
™
, make sure
to solder 1x8 male headers to both left
and right side of the board. Two 1x8 male
headers are included with the board in
the package.
and right side of the board. Two 1x8 male
headers are included with the board in
the package.
click
BOARD
www.mikroe.com
Color click Manual
ver. 1.01
0 100000 024294
Color click
™
is an accessory board in
mikroBUS
™
form factor. It’s a compact
and easy solution for adding red, green,
blue and clear light sensing to your design.
It features
It features
TCS3471
color RGB light-
to-digital converter, three NPN resistor-
equipped transistors as well as RGB LED.
Color click
equipped transistors as well as RGB LED.
Color click
™
communicates with the target
board microcontroller via
mikroBUS
™
I
2
C
(SDA, SCL), AN, CS, PWM and INT lines.
The board is designed to use 3.3V and 5V
power supply.
Color
click
Color click
™
with it’s
TCS3471
IC is a color
light sensor that detects light intensity
under a variety of lightning conditions. The
under a variety of lightning conditions. The
TCS3471
contains 4x4 photodiode array,
integrating amplifiers, ADCs, accumulators,
clocks, buffers, comparators and state
machine. RGB LED is provided to help you
illuminate the objects if no other light source
is available. This board is ideal for RGB LED
backlight control, industrial process control,
medical diagnostic and many more.
clocks, buffers, comparators and state
machine. RGB LED is provided to help you
illuminate the objects if no other light source
is available. This board is ideal for RGB LED
backlight control, industrial process control,
medical diagnostic and many more.