Mikroelektronika MIKROE-442 Datenbogen
462
mikoBasic PRO for dsPIC30/33 and PIC24
MikroElektronika
Soft_UART_Break
Prototype
sub procedure Soft_UART_Break()
Description Soft_UART_Read is blocking routine and it can block the program flow. Calling
Soft_UART_Break
routine from the interrupt will unblock the program execution. This mechanism is similar to WDT.
Parameters None.
Returns
Returns
Nothing.
Requires
Nothing.
Example
dim data1, error, counter as byte
sub procedure Timer1Int() org IVT_ADDR_T1INTERRUPT
counter = 0
if (counter >= 20) then
Soft_UART_Break()
counter = 0 ‘ reset counter
else
Inc(counter) ‘ increment counter
end if
T1IF_bit = 0 ‘ Clear Timer1 overflow interrupt flag
end sub
main:
...
if (Soft_UART_Init(PORTF, 2, 3, 14400, 0) = 0) then
Soft_UART_Write(0x55)
end if
...
‘ try Soft_UART_Read with blocking prevention mechanism
IPC0 = IPC0 or 0x1000 ‘ Interrupt priority level = 1
T1IE_bit = 1 ‘ Enable Timer1 interrupts
T1CON = 0x8030 ‘ Timer1 ON, internal clock FCY, prescaler 1:256
data1 = Soft_UART_Read(&error)
T1IE_bit = 0 ‘ Disable Timer1 interrupts
end.
Notes
The Software UART library implements time-based activities, so interrupts need to be disabled when
using it.