E-flite 1120 mm EFL6775 Datenbogen

This test ensures that the AS3X control system is functioning properly.  
Assemble the aircraft and bind your transmitter to the receiver before 
performing this test.

1.  Fully lower the throttle. 

2.   Move the fl ap switch to full fl aps before performing this test. 

IMPORTANT: The AR636 programming for this aircraft increases control sur-
face movement when fl aps are fully down.

3.  Move the entire aircraft as shown and ensure the control surfaces move in 

the direction indicated in the graphic. If the control surfaces do not respond 
as shown, do not fl y the aircraft. Refer to the receiver manual for more 
information.

Once the AS3X system is active, control surfaces may move rapidly. This is 
normal. AS3X is active until the battery is disconnected.