Reely remote control Electric Glider Sky Hawk RtF 1200 mm 3389 / 408C1 Datenbogen

• After you have checked resp. adjusted the correct

position of the servo levers, you can now suspend the
fork heads (1) of the control rods each in the center
boring of the rudder horns (2).

• Now check whether the rudders are exactly in the central

position while the transmitter and receiver unit is turned
on.

The rudder (3) may neither deflect to the left or the right
and the elevator unit (4) may not point upwards or
downwards (also see ill. 13).

• In case of deviation from the central position, you can change the total length of the control by twisting the fork

heads and exactly align the rudder flap.

Make sure to turn the receiver system off in all cases before performing adjustment work on the control
rods.

You can best see a slant of the rudder flaps of you look at the model from behind at a distance.