Reely 1:10 RC model car Electric Monster truck FS-53801-6 Benutzerhandbuch
Produktcode
FS-53801-6
72
10. Operation
a) Removing the vehicle body
The vehicle body is secured with holding clips which must be pulled out from the retaining pins. The vehicle body can
then be lifted off.
then be lifted off.
b) Inserting the battery pack into the vehicle
Caution!
The battery pack must not be connected to the speed controller yet!
The battery compartment is located on one side of the vehicle. The battery pack is fastened with a plastic bar that is
secured with two holding brackets.
secured with two holding brackets.
Insert the rechargeable battery pack so that the connection cable cannot get caught in the steering mechanism or the
drive.
drive.
c) Inserting batteries/rechargeable batteries into the remote control
(transmitter)
(transmitter)
If you have not already done so, insert batteries/rechargeable batteries into your remote control (transmitter). Please
also note the operating instructions of your remote control.
also note the operating instructions of your remote control.
d) Switching on the remote control (transmitter)
Always turn on the remote control (transmitter) before connecting the rechargeable battery packs to the speed controller.
Check the status of the inserted batteries.
Check the status of the inserted batteries.
e) Connecting the battery pack to the speed controller
Before connecting the battery packs to the speed controller, switch on the remote control (transmitter) (see chapter 10.
c) and 10. d)).
c) and 10. d)).
To prevent a sudden movement of the drive and an uncontrolled movement of the model (e.g. if the trim for
the drive is wrongly adjusted), place the vehicle on a suitable support such as a starter box so that the drive
can turn freely.
the drive is wrongly adjusted), place the vehicle on a suitable support such as a starter box so that the drive
can turn freely.
Switch off the speed controller.
Now connect the battery pack to the speed controller.