Novatek SINGLE-PHASE POWER LIMITER OM-110 OM-110 Datenbogen
Produktcode
OM-110
- 4 -
ОМ-110
NOVATEK-ELECTRO
In accordance to all safety regulations connect OM-110 as shown on the scheme above (Figure 2). The
wire of the circuit which should be under the device control must be inserted through the hole in the case of
OM-110. Next step is to set up the type of measured power using DIP-switch (item 5; Figure 1) and adjust the
range for maximal power threshold values using the knob (item 4; Figure 1). Then set up the tripping time
delay and autoreclosing time delay (items 7, 8, 9; Figure 1).
OM-110. Next step is to set up the type of measured power using DIP-switch (item 5; Figure 1) and adjust the
range for maximal power threshold values using the knob (item 4; Figure 1). Then set up the tripping time
delay and autoreclosing time delay (items 7, 8, 9; Figure 1).
ATTENTION!!! According safety regulations all the connections must be performed only on fully
deenergized device!
After all the connections are done it’s necessary to turn ON the power supply and make precise
adjustment of all the knobs according to the values shown on the digital LED display.
ОМ-110 is ready for
operation.
For the convenience the scales for time delays are split for some ranges:
Autoreclosing time delay scale is divided to the ranges 0-100 and 100-900 seconds
Tripping time delay scale is divided to the ranges 0-50 and 50-300 seconds.
2. STORAGE AND SHIPPING CONDITIONS
The OM-110 product in original manufacturer packing should be stored in enclosed rooms at the
Autoreclosing time delay scale is divided to the ranges 0-100 and 100-900 seconds
Tripping time delay scale is divided to the ranges 0-50 and 50-300 seconds.
2. STORAGE AND SHIPPING CONDITIONS
The OM-110 product in original manufacturer packing should be stored in enclosed rooms at the
temperature in the range from -45°C to +70°C and exposed to no more than 80% of relative humidity when
there are no fumes in the air that exert a deleterious effect on package and the switch material. The Buyer
must provide the protection of the switch against mechanical damages in transit.
there are no fumes in the air that exert a deleterious effect on package and the switch material. The Buyer
must provide the protection of the switch against mechanical damages in transit.
3. WARRANTY
Novatek-Electro LTD. Company assures and guarantee trouble-free operation of OM-110 phase switch
manufactured by it within 36 months from the date of sale, provided:
-- the proper connection;
-- the safety of the inspection quality control department seal;
-- the integrity of the case, no traces of an opening, cracks, spalls etc.
-- the safety of the inspection quality control department seal;
-- the integrity of the case, no traces of an opening, cracks, spalls etc.