Siemens SPS starter kit 6ED1057-3BA00-0AA8 12 Vdc, 24 Vdc 6ED1057-3BA00-0AA8 Datenbogen
Produktcode
6ED1057-3BA00-0AA8
Programming LOGO!
3.7 Writing and starting the circuit program
LOGO!
Manual, 06/2014, A5E33039675
Manual, 06/2014, A5E33039675
97
Regardless of whether you enable or disable synchronization, LOGO! always sends the
time-of-day to the expansion modules at power-up, every hour (STOP mode or RUN mode),
and when the time of day changes (either after a clock reset or summertime/wintertime
conversion).
Note
When using a LOGO! Base Module with digital or analog expansion modules, but without a
When using a LOGO! Base Module with digital or analog expansion modules, but without a
communications module, you must not activate time synchronization. You must check
whether time synchronization is disabled.
Enabling/disabling synchronization in programming mode
To enable or disable time synchronization, follow these steps:
1. Switch LOGO! to programming mode. LOGO! displays the main menu.
1. Switch LOGO! to programming mode. LOGO! displays the main menu.
2. Select "
①
": Press or
3. Confirm "
①
": Press OK
4. Move the cursor to "
②
": Press or
5. Confirm "
②
": Press OK
6. Move the cursor to "
③
": Press or