Wachendorff WLANAP0C WLAN ACCESS POINT WLANAP0C Datenbogen
Produktcode
WLANAP0C
Order information
Type
Order-No.
WLAN Access Point Compact IEEE802.11 g/b
WLANAP0C
WLANANT55 included
High gain antenna
High gain antenna
WLANANT90
Dipol antenna 2,4 GHz@9 dBi m. 1,5 m cable
Accessories
Standard dipole antenna
Standard dipole antenna
WLANANT55
Whip antenna 2,4 GHz@4 dBi
DIN-rail power supply, 230VAC/24VDC
DIN-rail power supply, 230VAC/24VDC
PS24V03AA
l IEEE 802.11g/b 54 Mbps wireless network
l
l Wireless-Client-Isolation
l Configuration via Web Server, or Windows-based utility programs
l Upgradeable firmware via network connection
l Metal housing and DIN-rail mounting
l Standard 2,4 Ghz, 4 dBi antenna included or optional
l
l Wireless-Client-Isolation
l Configuration via Web Server, or Windows-based utility programs
l Upgradeable firmware via network connection
l Metal housing and DIN-rail mounting
l Standard 2,4 Ghz, 4 dBi antenna included or optional
high gain antenna on request.
Fast Handoff and smart routing
The
employs an advanced algorithm for fast roaming for
mobile stations that roam across several coverage networks or cells
very often. It is suitable for warehouse management where forklifts or
mobile carts are moving around a large warehouse area that is de-
ployed with several wireless access points. By deploying a smart
beacon management at the wireless access point and the mobile
station, the hand-off process delay which typically takes 1-4 seconds
can be reduce to be less than 0.5 second. However, it is backward
compatible to IEEE 802.11 standard wireless stations, and can be used
together with other standard wireless access points and stations.
very often. It is suitable for warehouse management where forklifts or
mobile carts are moving around a large warehouse area that is de-
ployed with several wireless access points. By deploying a smart
beacon management at the wireless access point and the mobile
station, the hand-off process delay which typically takes 1-4 seconds
can be reduce to be less than 0.5 second. However, it is backward
compatible to IEEE 802.11 standard wireless stations, and can be used
together with other standard wireless access points and stations.
System
32-Bit CPU, 150 MHz RISC processor with MMU,
2 + 8 MB flash memory (2 MB for boot loader),
32 MB SDRAM, 2 KByte EEPROM,
hardware build-in watchdog.
32-Bit CPU, 150 MHz RISC processor with MMU,
2 + 8 MB flash memory (2 MB for boot loader),
32 MB SDRAM, 2 KByte EEPROM,
hardware build-in watchdog.
Ethernet
Compliant to IEEE802.3 standard, RJ-45 connector, 10/100 Mbps data
rate with auto detection, automatic MDI/MDI-X.
Compliant to IEEE802.3 standard, RJ-45 connector, 10/100 Mbps data
rate with auto detection, automatic MDI/MDI-X.
WLAN
Compliant to IEEE802.11g/b standard, Mini-PCI (for wireless modules),
64-bit/128-bit WEP data encryption, WPA/WPA2-PSK compatibel
(supports TKIP/AES encryption), modulation: CCK, DQPSK, DBPSK,
OFDM (11g); TX power: 11b: 15 dBm, 11g: 14 dBm;
RX sensitivity: -66 dBm@54 Mbps, -80 dBm@11 Mbps;
Transmission rate 54 Mbps (max.) with auto fallback, transmission
distance up to 300 m; topology: infrastructure, Ad-Hoc
Antenna connector: reverse SMA.
The WLAN access point has been specially designed for industrial
applications and tested. The combination with non-industrial WLAN
USB sticks is not recommended.
Compliant to IEEE802.11g/b standard, Mini-PCI (for wireless modules),
64-bit/128-bit WEP data encryption, WPA/WPA2-PSK compatibel
(supports TKIP/AES encryption), modulation: CCK, DQPSK, DBPSK,
OFDM (11g); TX power: 11b: 15 dBm, 11g: 14 dBm;
RX sensitivity: -66 dBm@54 Mbps, -80 dBm@11 Mbps;
Transmission rate 54 Mbps (max.) with auto fallback, transmission
distance up to 300 m; topology: infrastructure, Ad-Hoc
Antenna connector: reverse SMA.
The WLAN access point has been specially designed for industrial
applications and tested. The combination with non-industrial WLAN
USB sticks is not recommended.
Supply: 9 to 48 VDC, max. 4,5 W consuption (during transmission)
WLANAP0C
The Wireless Client Isolation deploys intelligent network isolation to
create a virtual network among wireless clients. We can prevent the
communication among wireless clients into two levels (1) blocking all
communication among wireless clients or (2) allowing only wireless
clients associated to the same AP to communicate to each other. This is
to help operators to separate malicious traffic from guest or public
wireless LAN to flood the main wireless control network. It provides
more network security, preventing possible data flooding due to virus,
worm or spam.
create a virtual network among wireless clients. We can prevent the
communication among wireless clients into two levels (1) blocking all
communication among wireless clients or (2) allowing only wireless
clients associated to the same AP to communicate to each other. This is
to help operators to separate malicious traffic from guest or public
wireless LAN to flood the main wireless control network. It provides
more network security, preventing possible data flooding due to virus,
worm or spam.
Temperature range: Operation: 0 °C to +65 °C,
Storage: -40 °C to +85 °C
Dimensions (WxHxD): 45 mm x 91 mm x 80 mm
Software and configuration: Web interface / software program
Supported protocols: ICMP, IP, TCP, UDP, DHCP Client, Telnet, DNS,
SNMP, HTTP, SMTP, SNTP
SNMP, HTTP, SMTP, SNTP
Copyright by Wachendorff Prozesstechnik GmbH & Co. KG. All information without guarantee, subject to change without notice. The contents of the
document contents of a periodic review; the newest version could be found on our web site.
document contents of a periodic review; the newest version could be found on our web site.
Date: 21.12.2012
Wireless Access Point 802.11g/b WLANAP0C
Wachendorff Prozesstechnik GmbH & Co. KG
Industriestrasse 7
D-65366 Geisenheim
Tel.: +49 (0) 67 22 / 99 65 - 20
Fax: +49 (0) 67 22 / 99 65 - 78
www.wachendorff-prozesstechnik.de
Industriestrasse 7
D-65366 Geisenheim
Tel.: +49 (0) 67 22 / 99 65 - 20
Fax: +49 (0) 67 22 / 99 65 - 78
www.wachendorff-prozesstechnik.de
WLANAP0C
Dimensions in mm
45,4
9
0
,6