Lappkabel Violet 2170219 Datenbogen
Produktcode
2170219
U.I. Lapp
GmbH
DATA SHEET
UNITRONIC BUS PB A 1 x 2 x 0,64
DB2170219
valid from: 17.11.2011
Originator: RAWE/PDC
approved: HAPF/PDC
Document:
DB2170219
page 1 of 2
All rights reserved acc. to DIN ISO 16016.
PD 0019/2.2_11.10DE
PD 0019/2.2_11.10DE
Application
Data cable with UL- and CSA approval for the fieldbus-system PROFIBUS DP, PROFIBUS FMS, SIEMENS SIMATIC
®
NET (acc.
to DIN 19245, Teil 3 und EN 50170 Kabeltyp A) and for the fieldbus system FIP (Factory Instrumentation Protocol) as well as
for high performance data networks with 150 Ohms nominal impedance. The cable is designed for the system-defined
transmission rates of 1.5 Mbit/s, 2.5 Mbit/s and 12 Mbit/s, the transmission characteristics conform to the system and
guarantee a high operating security during data transmission. It is suitable for interfaces RS 422 and RS 485.
The cable is intended for permanent installation in dry and damp interiors. With the double screening the cable is suitable for
installation in electromagnetic demanding areas.
Approval: UL /
for high performance data networks with 150 Ohms nominal impedance. The cable is designed for the system-defined
transmission rates of 1.5 Mbit/s, 2.5 Mbit/s and 12 Mbit/s, the transmission characteristics conform to the system and
guarantee a high operating security during data transmission. It is suitable for interfaces RS 422 and RS 485.
The cable is intended for permanent installation in dry and damp interiors. With the double screening the cable is suitable for
installation in electromagnetic demanding areas.
Approval: UL /
C
UL Type CMX acc. to UL 444 and CSA C22.2 No. 214-08
Design
Conductor
bare copper, nom. 0.64 mm Ø (22 AWG)
Insulation
Skin-Foam-Skin PE, core ∅ nom. 2.55 mm
Core identification code
cores red and green
Stranding
2 cores together with 2 fillers
Wrapping
1 layer plastic-foil
Screening
plastic-laminated aluminium foil, side with metal outwards, braid of tinned
copper wires, coverage min. 80%
copper wires, coverage min. 80%
Outer sheath
PVC, violet similar to RAL 4001, wall thickness nom. 1.0 mm,
outer diameter: max. 8.0 mm
outer diameter: max. 8.0 mm
Electrical properties at 20° C
Resistance (loop)
max. 115 Ω/km
Insulation resistance
min. 5 GΩxkm
Mutual capacitance
ca. 28 nF/km
(at 800 Hz)
(at 800 Hz)
Inductance
ca. 0.83 mH/km
(at 800 Hz)
(at 800 Hz)
Characteristic impedance
9.6 kHz: 270 Ω ± 27
38.4 kHz: 185 Ω ± 18.5
3 bis 20 Mhz: 150 Ω ± 15
38.4 kHz: 185 Ω ± 18.5
3 bis 20 Mhz: 150 Ω ± 15
Line attenuation
9.6 kHz: max. 0.25 dB/100 m
38.4 kHz: max. 0.4 dB/100 m
200 kHz: max. 0.9 dB/100m
4 MHz: max. 2.2 dB/100 m
16 MHz: max. 4.2 dB/100 m
38.4 kHz: max. 0.4 dB/100 m
200 kHz: max. 0.9 dB/100m
4 MHz: max. 2.2 dB/100 m
16 MHz: max. 4.2 dB/100 m
Velocity of propagation
nom. 81%
Transfer impedance up to 20 MHz
max. 5 mΩ/m
Operating peak voltage
225 V (not for power purposes)
Test voltage U
eff.
core/core und
core/screen
1500 V