Lappkabel 2170234 UNITRONIC BUS PA 1 x 2 x 1 BK Blue 2170234 Datenbogen
Produktcode
2170234
U.I. Lapp
GmbH
DATA SHEET
UNITRONIC BUS PA 1 x 2 x 1,0
DB2170234
valid from: 03.07.2012
Originator: RAWE/PDC
approved: HAPF/PDC
Document:
DB2170234
page 1 of 1
All rights reserved acc. to DIN ISO 16016.
PD 0019/2.2_11.10DE
PD 0019/2.2_11.10DE
Application
Data cable for PROFIBUS PA field net according to IEC 61158-2.
The cable is intended for fixes laying in dry and damp interiors and with the black outer sheath for laying outdoors.
The cable is intended for fixes laying in dry and damp interiors and with the black outer sheath for laying outdoors.
Design
Conductor
bare copper, nom. 1,0 mm
2
, ca. 1.32 mm ∅, fine-wire stranded
Insulation
foam-skin PE, core nom. 2,5 mm
Core identification code
cores red and green
Stranding
2 cores together with two fillers
Wrapping
1 layer PETP plastic foil
Screening
braid of tinned copper wires, coverage 85 % (nominal value)
Outer sheath
PVC lead-free, blue similar to RAL 5015 or black similar to RAL 9005,
wall thickness nom. 1,0 mm, outer diameter: 8,0 mm
wall thickness nom. 1,0 mm, outer diameter: 8,0 mm
Electrical properties at 20° C
Resistance (loop)
max. 44 Ω/km
Insulation resistance
min. 5 GΩxkm
Mutual capacitance
A/A: ca. 50 nF/km
A/S: ca. 80 nF/km
(at 800 Hz)
A/S: ca. 80 nF/km
(at 800 Hz)
Inductance
800 Hz: ca. 0,4 mH/km
Characteristic impedance
31,25 kHz: 100 Ω ± 20%
≥ 1 MHz: nom. 80 Ω
≥ 1 MHz: nom. 80 Ω
Line attenuation
39 kHz: max. 0,3 dB/100 m
100 kHz: nom. 0,35 dB/100 m
1 MHz: nom. 1,2 dB/100 m
100 kHz: nom. 0,35 dB/100 m
1 MHz: nom. 1,2 dB/100 m
Velocity of propagation
nom. 79%
Transfer impedance up to 30 MHz
max. 250 mΩ/m
Operating peak voltage
250 V (not for power purposes)
Test voltage U
eff.
core/core and
core/screen
1500 V
Mechanical and thermal properties
Minimum bending radius
static: 65 mm
Permissible temperature range
during installation: -5˚ C up to +60˚ C
static: -40˚ C up to +80˚ C
static: -40˚ C up to +80˚ C
Flame propagation
flame retardant acc. to IEC 60332-1-2
General requirements
Dangerous and forbidden substances acc. to RoHS directive (2002/95/EG) are
not allowed to the manufacturing.
not allowed to the manufacturing.