Lappkabel 2170371 Interface Cable 2 x 1.5 mm² Yellow 2170371 Datenbogen
Produktcode
2170371
U.I. Lapp
GmbH
DATA SHEET
UNITRONIC BUS ASI LD G 2 x 2.5
DB2170371
valid from: 16.05.2012
Originator: RAWE/PDC
approved: HAPF/PDC
Document:
DB2170371
page 1 of 1
All rights reserved acc. to DIN ISO 16016.
PD 0019/2.2_11.10DE
PD 0019/2.2_11.10DE
Application
UNITRONIC® BUS ASI LD G (type code: 3G3G-FL 2 x 2,5) is a flat fieldbus cable with 2 cores for AS-Interface (Actuator-
Sensor Interface) networking system for the lower field area. The cable is suitable for fixed installation and for flexible
applications without drag forces and forcible control in dry, damp and wet interiors. The black version is also allowed to be
used outdoors.
Data transmission for AS-Interface telegrams and power supply for AS-I slaves, master, repeater, extender and sensors is
done via this unscreened, geometrically-coded two-core flat cable. The contacting of the conductors by the insulation-
displacement-system of the AS-I modules is possible without stripping the insulation.
Sensor Interface) networking system for the lower field area. The cable is suitable for fixed installation and for flexible
applications without drag forces and forcible control in dry, damp and wet interiors. The black version is also allowed to be
used outdoors.
Data transmission for AS-Interface telegrams and power supply for AS-I slaves, master, repeater, extender and sensors is
done via this unscreened, geometrically-coded two-core flat cable. The contacting of the conductors by the insulation-
displacement-system of the AS-I modules is possible without stripping the insulation.
Design
Conductor
tinned copper, superfine-wire stranded, nom. 2.5 mm
2
acc. to IEC 60228/
VDE 0295, class 6
Insulation
rubber compound EI4 acc. to HD 22.1, core Ø nom. 2.55 mm
Core identification code
cores brown (+) and blue (-)
Core assembly
2 cores parallel deviation, the brown core is assembled inline with the leading
edge
edge
Outer sheath
rubber compound EM3 in support to HD 22.1, yellow similar to RAL 1012 (article
number 2170371) or black similar to RAL 9005 (article number 2170372)
number 2170371) or black similar to RAL 9005 (article number 2170372)
Electrical properties at 20° C
Resistance
max. 8.21/km
Specific volume resistivity
min. 1 MΩxkm
Mutual capacitance
max. 80 nF/km
Inductance
0.5 mH/km up to 0.75 mH/km
Characteristic impedance
70 Ω up to 140 Ω
(at 167 MHz)
(at 167 MHz)
Operating peak voltage
300 V (not for power purposes)
Test voltage U
eff.
core/core
2000 V
Mechanical and thermal properties
Minimum bending radius
moved: 24 mm in cable center line
fixed: 12 mm in cable center line
fixed: 12 mm in cable center line
Permissible temperature range
moved: -25˚ C up to +80˚ C
fixed: -40˚ C up to +80˚ C
fixed: -40˚ C up to +80˚ C
Allowed drag force during
installation
installation
max. 250 N
General requirements
Dangerous and forbidden substances acc. to RoHS directive (2002/95/EG) are
not allowed to the manufacturing.
not allowed to the manufacturing.