Lappkabel 2170223 UNITRONIC BUS Yv L2/FIP Profibus Cable Black 2170223 Datenbogen
Produktcode
2170223
U.I. Lapp
GmbH
DATA SHEET
UNITRONIC BUS PB Yv 1 x 2 x 0,64
DB2170223
valid from: 29.11.2011
Originator: RAWE/PDC
approved: HAPF/PDC
Document:
DB2170223
page 1 of 2
All rights reserved acc. to DIN ISO 16016.
PD 0019/2.2_11.10DE
PD 0019/2.2_11.10DE
Application
Fieldbus cable for the Siemens field network SIMATIC NET (acc. to DIN 19245 part 3 and EN 50170), for fieldbus system FIP
(Factory Instrumentation Protocol) as well as for high performance data networks with 150 Ohms nominal impedance. The
cable is designed for the system-defined transmission rates of 1.5 Mbit/s, 2.5 Mbit/s and 12 Mbit/s, the transmission
characteristics are conform to the system and guarantee a high operating security during data transmission.
Due to it´s double screening it is suitable for installation in electromagnetically demanding areas. The cable is intended for
permanent installation inside and outside as well as for underground burial. The outer sheath is unaffected by atmospheric
UV-radiation at above-ground installation.
(Factory Instrumentation Protocol) as well as for high performance data networks with 150 Ohms nominal impedance. The
cable is designed for the system-defined transmission rates of 1.5 Mbit/s, 2.5 Mbit/s and 12 Mbit/s, the transmission
characteristics are conform to the system and guarantee a high operating security during data transmission.
Due to it´s double screening it is suitable for installation in electromagnetically demanding areas. The cable is intended for
permanent installation inside and outside as well as for underground burial. The outer sheath is unaffected by atmospheric
UV-radiation at above-ground installation.
Design
Conductor
bare copper wire, nom. 0.64 mm Ø
Insulation
skin-foam-skin PE, alternatively foam-skin, core Ø nom. 2.55 mm
Core identification code
cores red similar to RAL 3000 and green similar to RAL 6018
Stranding
2 cores together with 2 fillers
Wrapping
1 layer plastic foil
Screening
plastic-laminated aluminium foil, side with metal outwards, braid of tinned
copper wires, coverage nom. 85%
copper wires, coverage nom. 85%
Outer sheath
PVC, lead free, shore hardness A 77 ± 3, black similar to RAL 9005,
wall thickness nom. 1.8 mm, outer diameter: ca. 9.4 mm
wall thickness nom. 1.8 mm, outer diameter: ca. 9.4 mm
Electrical properties at 20° C
Resistance (loop)
max. 110 Ω/km
Insulation resistance
min. 5 GΩxkm
Mutual capacitance
ca. 28 nF/km
(at 800 Hz)
(at 800 Hz)
Inductance
ca. 0.83 mH/km
(at 800 Hz)
(at 800 Hz)
Characteristic impedance
9.6 kHz: 270 Ω ± 27
38.4 kHz: 185 Ω ± 18.5
3 bis 20 Mhz: 150 Ω ± 15
38.4 kHz: 185 Ω ± 18.5
3 bis 20 Mhz: 150 Ω ± 15
Line attenuation
9.6 kHz: max. 0.25 dB/100 m
38.4 kHz: max. 0.4 dB/100 m
200 kHz: max. 0.9 dB/100 m
4 MHz: max. 2.2 dB/100 m
16 MHz: max. 4.2 dB/10 0m
38.4 kHz: max. 0.4 dB/100 m
200 kHz: max. 0.9 dB/100 m
4 MHz: max. 2.2 dB/100 m
16 MHz: max. 4.2 dB/10 0m
Velocity of propagation
nom. 81%
Transfer impedance up to 20 MHz
max. 10 mΩ/m
Operating peak voltage
225 V (not for power purposes)
Test voltage U
eff.
core/core und
core/screen
1500 V