AEG DVD 4551 400451 Datenbogen

45

 

Make sure that no hardware is lost when removing the fuse. Also ensure 
that hardware is fitted back into the correct place.

If the device does not work when using the 12 V cigarette lighter adapter, 
change the fuse. This can be found in the top of the 12 V adapter.

Unscrew the round, silver endpiece (A).

 

K

Remove the fuse (C) and replace it with a 2 A new time delay fuse.

 

K

Ensure that the silver tip (B) is fitted into the silver endpiece. Screw the 

 

K

endpiece back on.

1.  For private listening use headphones with 3.5 mm stereo jack and 

connect to earphones jack ( ).

2.  Press   VOL+/VOL-   to increase or decrease the volume.

 

Do not adjust the headphone volume to loud. This may be hazard-

 

K

ous to your hearing and you may endanger others and yourself.
Adjust to a low volume to avoid disrupting your surroundings.

 

K

If you suffer from tinnitus, keep volume to a minimum or refrain from 

 

K

use of this unit.
Otologists advise a against long term use of headphones over an 

 

K

extended period of time.

USB port (Fig. 1/12)
Connect a USB device directly to the port on the right side of the unit.

Card slot (Fig. 1/1)
Insert an MMC/SD or MS card with the label facing back in the card slot 
on the front of the unit.

For further use with a USB storage device or memory card, please refer to 
section   Page 51 “Work in Data Mode”. 

Turn the unit on by sliding the “POWER ON/OFF” main switch on the 
side of the unit to “ON”. The power-on indicator (Fig 1/7; 2/10) turns red.

 

In Dual mode, the DVD MONITOR must be switched on so that the 
power supply is fed to the second monitor.