Buffalo TeraStation 1200 TS1200D0602-EU Datenbogen

86

any other hard drive.

Double-click the 

 icon to start NAS Navigator2.

Right-click on your TeraStation's icon and choose Properties - IP Address.

Uncheck "Use DHCP" and enter the desired settings, then click OK. If the username and password prompt 
appears, enter the admin username and password.

Note: The following IP addresses are reserved and should not be used. If you configure one of them by accident, 
initialize IP address settings with the function button on the TeraStation.

Local loopback address: 127.0.0.1, 255.255.255.0
Network address: 0.0.0.0, 255.255.255.0
Broadcast address: 255.255.255.255, 255.255.255.0
The IP address range from 224.0.0.0 to 255.255.255.255

NAS Navigator2 is a utility program that makes it easy to display Settings, change the TeraStation's IP address, or 
check its hard drive.