Buffalo NAS server 6 TB LS421-6TBR LS421-6TBR LS421-6TBR Datenbogen

Produktcode

LS421-6TBR

• Use a Buffalo OP-HD/LS series drive of the same size or larger for the replacement drive. If a larger drive is used,

the extra space will not be usable in a mirrored RAID array.

• To avoid damaging the LinkStation with static electricity, ground yourself by touching something made of metal

before handling any sensitive electronic parts.

• After a drive is replaced, it takes about 30 minutes before normal file reading and writing are restored. Settings

may not be accessible during this period.

• Do not change the order of the hard drives in the LinkStation. For example, pulling out drive 1 and replacing it

with drive 2 may cause data to be corrupted or lost.

• If a new drive is not recognized after installing it, click Rediscover Disk in Settings.

Hard Drive Replacement Examples
1

Turn the LinkStation off and remove all cables.

Squeeze the left side of the front panel and pull the panel off.

Push the failed drive’s cartridge up and remove it from the LinkStation.

Notes:
• Do not press hard on the top of the LinkStation.
• Pull the drive straight out the front of the chassis.

Hard drives that have not triggered an error message are still on. Do not unplug or remove them without
dismounting them first.

Remove the drive from the cartridge.