Buffalo NAS server 6 TB LS421-6TBR LS421-6TBR LS421-6TBR Datenbogen
Produktcode
LS421-6TBR
87
LAN Port
Interface
IEEE802.3ab (1000BASE-T)
IEEE802.3u (100BASE-TX)
IEEE802.3 (10BASE-T)
IEEE802.3u (100BASE-TX)
IEEE802.3 (10BASE-T)
Transfer Speed
1000 Mbps Full duplex (auto-negotiation)
100 Mbps Full duplex/Half duplex (auto-negotiation)
10 Mbps Full duplex/Half duplex (auto-negotiation)
100 Mbps Full duplex/Half duplex (auto-negotiation)
10 Mbps Full duplex/Half duplex (auto-negotiation)
Number of Port
1 Port (supports AUTO-MDIX)
Connector Type
RJ-45 8-pin
Protocol
TCP/IP
Access Method
CSMA/CD
File Sharing
SMB/CIFS, AFP, FTP
Management
HTTP/HTTPS
Jumbo Frame
1518/4102/7422/9216 bytes
(Including 14 bytes of the header and 4 bytes of FCS)
(Including 14 bytes of the header and 4 bytes of FCS)
USB Port
LS420D, LS410D: USB 2.0 Port (Series A) x 1
LS421DE: USB 2.0 Port (Series A) x 1, USB 3.0 Port (Series 1) x 1
Note: Compatible USB devices: supported USB devices including Buffalo USB hard
drives and printers
LS421DE: USB 2.0 Port (Series A) x 1, USB 3.0 Port (Series 1) x 1
Note: Compatible USB devices: supported USB devices including Buffalo USB hard
drives and printers
Internal Hard Drive
If a hard drive in LS420D and LS421DE malfunctions, replace it with a Buffalo OP-HD/LS
series of the same capacity, available from www.buffalotech.com.
Power Supply
AC 100 - 240 V, 50/60 Hz
Power Consumption
LS410D: max ~24 W
LS420D: max ~48 W
LS421DE: max ~48 W
LS420D: max ~48 W
LS421DE: max ~48 W
Dimensions (WxHxD) /
Weight
LS410D: 45 × 128 × 205 mm (excluding protruding parts)/ ~1.3 kg (2.8 lb.)
LS420D: 87 × 128 × 205 mm (excluding protruding parts)/ ~2.4 kg (5.2 lb.)
LS421DE: 87 × 128 × 205 mm (excluding protruding parts)/ ~2.4 kg (5.2 lb.)
LS420D: 87 × 128 × 205 mm (excluding protruding parts)/ ~2.4 kg (5.2 lb.)
LS421DE: 87 × 128 × 205 mm (excluding protruding parts)/ ~2.4 kg (5.2 lb.)
Operating Environment
Temperature: 5-35°C; 41-95°F
Environment humidity: 20-80% (no condensation)
Environment humidity: 20-80% (no condensation)
Compatibility
Windows and Mac computers with Ethernet interface
Note: The LinkStation requires an Ethernet connection with your computer for
operation. It cannot be connected via USB.
Note: The LinkStation requires an Ethernet connection with your computer for
operation. It cannot be connected via USB.
Supported OS
Windows 8
*
, Windows 7
*
, Windows Vista
*
, Windows XP, Windows 2000, Windows XP
Media Center Edition (2004 or 2005), Windows Server 2012, Windows Server 2008
OS X 10.8, 10.7, 10.6
*32-bit and 64-bit
OS X 10.8, 10.7, 10.6
*32-bit and 64-bit
Compliance Information
FCC Warning
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference