Buffalo NAS server 8 TB TeraStation 1400 TS1400D0804-EU TS1400D0804-EU Datenbogen
![Buffalo](https://files.manualsbrain.com/attachments/9b1b53b017a12138833f39c4f8c1f2aa34c2c16e/common/fit/150/50/266e1b8b2619927602ffd298e5482e1aaec72f4e72045ee85919e6306019/brand_logo.png)
Produktcode
TS1400D0804-EU
77
Initializing with Function Button
1
Turn off the TeraStation.
2
Turn the TeraStation on while holding down the function button. The function LED will flash.
3
Press the function button again while the LED is flashing.
4
Initialization will take 5 to 10 minutes. Do not power down the TeraStation while it is initializing and showing
an I23 information message in NAS Navigator2 and with the power LED. When initialization is finished, reboot
your TeraStation.
an I23 information message in NAS Navigator2 and with the power LED. When initialization is finished, reboot
your TeraStation.
Notes:
• The following settings will be initialized: admin username, admin password, IP address, and Ethernet frame
• The following settings will be initialized: admin username, admin password, IP address, and Ethernet frame
size.
• To disable initializing the admin username and password, navigate to Management - Restore/Erase - Edit
and change "Restore factory default settings" to "Keep current settings". Be careful with this option! If this is
selected and you lose your admin password, you will not be able to reset it.
selected and you lose your admin password, you will not be able to reset it.
Initializing from Settings
You can also initialize TeraStation settings from Settings.
1
In Settings, click Management.
2
Click
to the right of "Restore/Erase".
3
Click Initialize TeraStation.
4
The "Confirm Operation" screen will open. Enter the confirmation number, then click OK.
5
The TeraStation will be restored to its factory default settings.
Logs
Follow the procedure below to check the TeraStation's logs.
1
In Settings, click Management.
2
Click
to the right of "Logs".