Buffalo TeraStation 3400 16TB TS3400D1604 Datenbogen
Produktcode
TS3400D1604
12
17
LAN Port 1
Use an Ethernet cable to connect this port to your network.
Use an Ethernet cable to connect this port to your network.
18
LAN Port 2
This second Ethernet port may be used for network redundancy or backup. You may connect a second TeraStation
directly to this port for backup.
This second Ethernet port may be used for network redundancy or backup. You may connect a second TeraStation
directly to this port for backup.
19
Power Connector
Use the included power cable to connect to an UPS, surge protector, or outlet.
Use the included power cable to connect to an UPS, surge protector, or outlet.
20
Fan
Do not block the fan.
Do not block the fan.
21
Anti-Theft Security Slot
Use this slot to secure your TeraStation with a cable lock (not included).
Use this slot to secure your TeraStation with a cable lock (not included).
22
UID Button
Press the UID button on the front or the back of the unit to cycle the blue LED on and off.
Press the UID button on the front or the back of the unit to cycle the blue LED on and off.
23
Serial Number
This sticker shows the TeraStation’s serial number.
This sticker shows the TeraStation’s serial number.
24
Factory Use Only
25
Link and Act LEDs
These LEDs show network activity. They blink orange when the TeraStation is accessed over the network.
These LEDs show network activity. They blink orange when the TeraStation is accessed over the network.
Installation
1
Insert the TeraNavigator CD into your computer.
TeraNavigator will launch.
TeraNavigator will launch.
2
Click Begin Installation.
3
Follow the steps on the screen to connect the TeraStation’s Ethernet and power cables and turn it on.
Note: Use LAN port 1 for initial setup. After setup, you may connect a second cable to LAN port 2. If you use LAN