Buffalo TeraStation 3400 16TB TS3400D1604 Datenbogen

35

damaged, you can recover data by replacing the damaged drive. If two or more drives are damaged at the same time, 
your data is lost.

RAID 6 arrays are available for TeraStations with 4 or more hard drives. RAID 6 combines 4 or more drives into a single 
array. The usable space is equal to the sum of the capacity of all drives minus the capacity of two drives. For example, if 
4 drives are combined into a RAID 6 array, the usable space  is the sum of the capacity of 2 drives. If 2 drives in the array 
are damaged, you can recover data by replacing them. If 3 or more  drives are damaged, your data is lost.

RAID 10 arrays are available for TeraStations with 4 or more hard drives. In this mode, mirrored pairs of drives in RAID 1 
arrays are combined into a RAID 0 array. The usable space is equal to the capacity of the smallest drive multiplied by the 
number of hard drives divided by 2.

*Modes marked with an asterisk are available for TS3400D and TS3400R TeraStations only.

To change RAID settings, navigate to Drives - RAID in Settings.

With JBOD, each hard drive in the TeraStation is addressed separately.  To put drives from an array into JBOD mode, 
follow the steps below.

Select RAID.

Select the array to delete.

Click Delete RAID Array.

Once JBOD is configured, create shared folders on each drive to use them.

To change the RAID mode, first put the drives in JBOD mode.