Buffalo TeraStation 3400 16TB TS3400D1604 Datenbogen

62

Notes: 
•  Do not unplug a drive whose status LED is green instead of red. Dismount it first or shut down the TeraStation 

before swapping a working drive. If you remove the drive without properly dismounting it, data may be lost or 
the TeraStation may malfunction.

•  Use a Buffalo OP-HDS series drive of the same size or larger for the replacement drive. If  a larger drive is used, the 

extra space will not be usable in a RAID array.

•  To avoid damaging the TeraStation with static electricity, ground yourself by touching something made of metal 

before handling any sensitive electronic parts.

•  After a drive is replaced, it takes about 30 minutes before normal file reading and writing are restored. Settings 

may not be accessible during this period.

•  Do not change the order of the hard drives in the TeraStation. For example, pulling out drive 1 and replacing it 

with drive 2 may cause data to be corrupted or lost.

•  If the LCD display does not change after a new drive is installed, click Rediscover Disk in Settings.

The section explains with TS3400D and TS3400R series models.

This section describes replacing a drive with 

the TeraStation on

.

TS3400D: Open the front cover with the included key.

The failed drive’s status LED will be glowing red. Push its unlock button and swing the lock mechanism out.