QNAP TS-231 Benutzerhandbuch

137

During a power loss, the NAS will wait for the specified time you enter in the "UPS

Settings" before powering off or entering auto-protection mode.

If the power restores before the end of the waiting time, the NAS will remain in operation

and cancel its power-off or auto-protection action.

Once the power restores:

If the NAS is in auto-protection mode, it will resume to normal operation.

If the NAS is powered off, it will remain off.

Diffe re nc e be twe e n a uto- prote c tion m ode a nd powe r- off m ode

M ode

Adv a nta ge

Dis a dv a nta ge

Auto-protection

mode

The NAS resumes after

power recovery.

If the power outage lasts

until the UPS is turned off,

the NAS may suffer from

abnormal shutdown.

Power-off mode

The NAS will be shut down

properly.

The NAS will remain off after

the power recovery. Manual

power on of the NAS is

required.

If the power restores after the NAS has been shut down and before the UPS device is

powered off, you may power on the NAS by Wake on LAN* (if your NAS and UPS device

both support Wake on LAN and Wake on LAN is enabled on the NAS). If the power

restores after both the NAS and the UPS have been shut down, the NAS will react

according to the settings in "System Settings" > "Power Recovery".

*This feature is not supported by TS-110, TS-119, TS-210, TS-219, TS-219P, TS-410,

TS-419P, TS-410U, TS-419U, TS-112, TS-212, TS-412, TS-412U. Please visit http://