TP-LINK JetStream TL-SG3216 TL-SG3216 Datenbogen
Produktcode
TL-SG3216
Chapter 21 QoS Commands
QoS (Quality of Service) function is used to optimize the network performance. It provides you with
network service experience of a better quality.
network service experience of a better quality.
qos
Description
The
qos command is used to configure CoS (Class of Service) based on port. To
return to the default configuration, please use
no qos command.
Syntax
qos cos-id
no qos
no qos
Parameter
cos-id —— The priority of port. It ranges from 0 to 7, which represent
CoS0-CoS7 respectively. By default, the priority is 0.
CoS0-CoS7 respectively. By default, the priority is 0.
Command Mode
Interface Configuration Mode (interface gigabitEthernet / interface range
gigabitEthernet)
gigabitEthernet)
User Guidelines
Port priority is one property of the port. When the port priority is specified, the
data will be classified into the egress queue based on the CoS value of the
ingress port and the mapping relation between the CoS and TC in
data will be classified into the egress queue based on the CoS value of the
ingress port and the mapping relation between the CoS and TC in
Example
Configure the priority of port 5 as 3:
TL-SG3424(config)# interface gigabitEthernet 1/0/5
TL-SG3424(config-if)# qos 3
qos dscp
Description
The
qos dscp command is used to enable the mapping relation between DSCP
Priority and CoS value. To disable the mapping relation, please use
no qos
dscp command.
144