Intellinet INT GIGABIT MEDIENKON.(SC)MULTIMODE 220M 506533 Datenbogen

 

  

The Intellinet Network Solutions Gigabit Ethernet Media Converter was specifically
designed to offer the network designer a device for migration from copper-based Ethernet
to Fiber Ethernet. Now migration or expansion of existing networks can be achieved with
minimum cost and complexity. The converter is completely transparent to the network so
the network performs exactly the way it did before – only now it can support both copper
and fiber mediums.

Provides fiber connectivity to Ethernet segments, allowing for even further networking expansion between extended
workgroups. Also provides building-to-building connectivity without the need for the cost and disruption associated with
the installation of additional routers.

Connecting the converter to fiber segments can further extend distances between networking nodes. This can be
achieved by direct connection between the converter and a fiber-based node or networking device.

Network managers can install fiber cabling anywhere within a network without changing the arrangement of copper-based
Ethernet. The compact size of the converter allows it to be easily deployed in any narrow desktop location or to be used

in a wall-mount installation. Several converters can be simultaneously installed into a 19" rack-mountable chassis.

Data transfer rate: 1000 Mbps
One 1000Base-T RJ45 port, maximum distance 100 m / 300 ft. (Cat5e and better)
RJ45 port with Auto MDI/MDI-X support and auto-negotiation
One 1000Base-SX multi-mode Fiber SC duplex port
Fiber distance support: up to 220 m / 720 ft (62.5/125 µm cable) or 550 m / 1800 ft
(50/125 µm cable)
Wavelength: 850 nm
Flow control
Status LEDs for power and Link/TX for both ports