Transition Networks JE-PSW-FX-02 Benutzerhandbuch
Specifications
Standards
IEEE Std. 802.3™, IEEE Std. 802.3ab™
Fiber Optic Connector Specs
Switches
SW1: Auto-Negotiation (UP = enable)
SW2: Full/Half Duplex (Copper)
(UP = full-duplex)
SW3: Force Speed (Copper)
(UP = 100Mbps)
SW4: Full/Half Duplex (Fiber)
(UP = full-duplex)
SW2: Full/Half Duplex (Copper)
(UP = full-duplex)
SW3: Force Speed (Copper)
(UP = 100Mbps)
SW4: Full/Half Duplex (Fiber)
(UP = full-duplex)
Dimensions
Width: 3.0" [76 mm]
Depth: 3.9" [100 mm]
Height: 1.0" [25 mm]
Depth: 3.9" [100 mm]
Height: 1.0" [25 mm]
Status LEDs
PWR: Lit for normal operation
LNK Act (fiber): Steady = Link;
Flashing = Rx Data
FD (fiber duplex): On = Full duplex
LNK Act (copper): Steady = Link;
Flashing = Rx Data
FD (copper duplex): On = Full duplex
100 (copper speed): On = 100Mbps
LNK Act (fiber): Steady = Link;
Flashing = Rx Data
FD (fiber duplex): On = Full duplex
LNK Act (copper): Steady = Link;
Flashing = Rx Data
FD (copper duplex): On = Full duplex
100 (copper speed): On = 100Mbps
Power
External AC/DC required; +12VDC,
0.5 A min
0.5 A min
Power Consumption
2.5 watts
Environment
0 – 50° C operating; 5% – 95% humidity
non-condensing;
0 – 10,000 feet altitude
non-condensing;
0 – 10,000 feet altitude
Shipping Weight
2 lbs. [0.90 kg]
Safety Compliance
Wall Mount Power Supply:
UL Listed, C-UL Listed (Canada)
UL Listed, C-UL Listed (Canada)
Regulatory Compliance
FCC Class A, CISPR22/EN55022
Class A, EN55024, CE Mark
Class A, EN55024, CE Mark
Warranty
Lifetime
s t a n d - a l o n e
m e d i a c o n v e r t e r
Transition Networks, Inc.
6475 City West Parkway
Minneapolis, MN 55344 USA
6475 City West Parkway
Minneapolis, MN 55344 USA
tel 952.941.7600
or 800.526.9267
fax 952.941.2322
info@transition.com
http://www.transition.com
or 800.526.9267
fax 952.941.2322
info@transition.com
http://www.transition.com
©2006 Transition Networks, Inc.
All trademarks are the property of their respective owners.
Technical information is subject to change without notice.
All trademarks are the property of their respective owners.
Technical information is subject to change without notice.
J/E-PSW-FX-02(xx)
Ordering Info
J/E-PSW-FX-02
10/100BASE-TX (RJ-45)
[100 m/328 ft.]
to 100BASE-FX 1300nm multimode (ST)
[2 km/1.2 mi.] Link Budget: 11.0 dB
J/E-PSW-FX-02(SC)
10/100BASE-TX (RJ-45)
[100 m/328 ft.]
to 100BASE-FX 1300nm multimode (SC)
[2 km/1.2 mi.] Link Budget: 11.0 dB
J/E-PSW-FX-02(SM)
10/100BASE-TX (RJ-45)
[100 m/328 ft.]
to 100BASE-FX 1310nm SM (SC)
[20 km/12.4 mi.] Link Budget: 16.0 dB
Single Fiber Products
Recommended use in pairs (see page 17)
Recommended use in pairs (see page 17)
J/E-PSW-FX-02(100)
10/100BASE-TX (RJ-45)
[100 m/328 ft.]
to 100BASE-FX 1310nm TX / 1550nm RX
single fiber single mode (SC)
[20 km/12.4 mi.] LB: 19.0 dB
J/E-PSW-FX-02(101)
10/100BASE-TX (RJ-45)
[100 m/328 ft.]
to 100BASE-FX 1550nm TX / 1310nm RX
single fiber single mode (SC)
[20 km/12.4 mi.] LB: 19.0 dB
Optional Accessories
(sold separately)
Wide Input (18 – 72VDC) Power Supplies:
SPS-1872-CC
Piggy Back Power Supply
SPS-1872-SA
Stand-Alone Power Supply
Mounting Options:
E-MCR-04
12-slot Media Converter Rack
WMBD
DIN Rail Bracket 5.0" [127 mm]
WMBD-FS
DIN Rail Bracket (flat, small) 3.1" [79 mm]
WMBS
Wall Mount Bracket 3.2" [81 mm]
The "Just Convert-It™" Bridging Media Converter is
an inexpensive, no frills way to extend the distance
between connections with different speeds or duplex
using fiber optic cable, while maintaining the same
quality and reliability found on Transition's full-
featured line of products.
an inexpensive, no frills way to extend the distance
between connections with different speeds or duplex
using fiber optic cable, while maintaining the same
quality and reliability found on Transition's full-
featured line of products.
10/100 Bridging
Just Convert-IT
™
10/100BASE-TX to 100BASE-FX
10/100 Bridging Media Converter
Unit & Port LEDs allow for quick
status information
Auto-Negotiation
AutoCross™
Ability to force 10Mbps or
100Mbps (TP port) and full or
half-duplex on both copper and
fiber.
half-duplex on both copper and
fiber.
Automatic Link Restoration
Min TX Max TX
RX
Max In
Link
PWR PWR
Sens
PWR Budget
SKU
(dBm)
(dBm) (dBm)
(dBm)
(dB)
J/E-PSW-FX-02
-19.0
-14.0
-30.0
-14.0
11.0
J/E-PSW-FX-02(SC)
-19.0
-14.0
-30.0
-14.0
11.0
J/E-PSW-FX-02(SM)
-15.0
-8.0
-31.0
-8.0
16.0
J/E-PSW-FX-02(100)
-13.0
-6.0
-32.0
-3.0
19.0
J/E-PSW-FX-02(101)
-13.0
-6.0
-32.0
-3.0
19.0
Connect Legacy Networking Equipment
Connect an existing 10Mbps device to
100Mbps devices.
100Mbps devices.
Eliminate Collision Domains
Connect two half-duplex hubs with a full-
duplex connection over fiber containing no
collisions.
duplex connection over fiber containing no
collisions.
10/100 Bridging