Konftel 300 910101059 Datenbogen
Produktcode
910101059
10
Answering a VoIP call
Press
.
The Konftel 300 has now been put into call mode and the LEDs show a steady blue light.
Indicate whether you want to start the call by answering in the computer’s VoIP
software.
The Konftel 300 functions as a speaker and microphone for the computer.
Ending a VoIP call
End the call in the computer’s VoIP software and put the Konftel 300 on stand-by by
pressing
.
The Konftel 300 now only functions as a speaker for the computer.
CALLS VIA DECT AND MOBILE PHONES
For these instructions, it is assumed that the Konftel 300 is connected to a DECT or
mobile telephone via a cable (optional accessory). Hereafter, both types of telephone are
referred to as mobile phones.
mobile telephone via a cable (optional accessory). Hereafter, both types of telephone are
referred to as mobile phones.
Select mobile as the telephone line
Press
LINE MODE and use the arrow buttons to select MOBILE as a phone line. Press
OK to confirm.
If you select MOBILE+USB as the line mode in the Konftel 300, you will be able to
combine the call with a call connected via the computer (see page 9).
combine the call with a call connected via the computer (see page 9).
Making calls using a mobile phone
Press
and dial the number on the mobile phone as you normally would.
The Konftel 300 now functions as a speaker and microphone for the mobile phone. The LEDs
show a steady blue light.
Ending calls
Ending the call on the mobile phone.
Press
to turn off the Konftel 300.
ANSWERING AND MAKING CALLS