Konftel 300 910101059 Datenbogen

23



 Select 

MENU > SETTINGS > RING LEVEL.



  Select your choice and press 

OK to confirm.



 There are six volume levels plus a silent mode. You will hear the ring tone for each 

level you select. If you select silent mode, an LED on the phone flashes when an 
incoming call is received. 

The Flash/R pulse (Register recall) is used to request a new line from the PBX. Different 
countries and PBXs may require different durations for activating the Flash/R pulse. 
Duration requirements should be specified in the technical data for the PBXs. 



 Select 

MENU > SETTINGS > FLASH.



  Select your choice and press 

OK to confirm.

 

Examples of suitable settings are: 
100 ms – Scandinavia, Europe, Siemens HiPath 
300 ms – Germany, France, Israel 
500 ms – USA

Konftel 300 needs to be configured to match the Caller ID standard in your country. 
Note that in some cases even individual states/provinces within a country use different 
standards. The table below is a guideline for choosing the correct setting. If the caller ID 
is not working properly, select another setting or contact your telephone service provider 
for further information. 

Caller ID standard 

Country

Bellcore (Telcordia) 

Canada (usually), USA, Australia, New Zealand,  
China

, 

Hong Kong, Singapore

ETSI 

Austria, Belgium, Czech Republic, France, Germany, Italy, 
Luxemburg, Norway, Poland, Spain, Slovenia, Switzerland, Turkey, 
South Africa, Taiwan

BT (British Telecom)   United Kingdom
DTMF 

Denmark, Finland, Greece, Iceland, Netherlands, Portugal, 
Sweden, China, India, Saudi Arabia, Brazil, Uruguay



 Select 

MENU > SETTINGS > CALLER ID.



  Select your choice and press 

OK to confirm.