Auerswald COMfortel WS-650 IP 90150 Benutzerhandbuch

Spectralink IP-DECT Server 6500 Installation and Configuration Guide

14215700 Version 3.0
June, 2013

13

Electrical Requirements for Repeater

The supplied power (power supply) for the charger must be 110 V to 120 V ac nominal (or 220 
V to 230 V ac nominal), 50/60 Hz. 

Environmental Requirements

The area where the handset is used must be within the temperature ranges of 0°C and 
40°C/32°F and 104°F.

For correct battery charging, the room temperature must be between 0°C and 40°C/0°F and 
104°F. Therefore, the handset must not be placed in direct sunlight. The battery has a built-in 
heat sensor which will stop charging if the battery temperature is too high.

For battery information, refer to the handset user guide.

The area where the handset is used must be between 20% and 80% non-condensing relative 
humidity.

Electrical Requirements

The following electrical requirement must be met:

The supplied power (power supply) for the charger must be 110 V to 120 V ac nominal (or 220 
V to 230 V ac nominal), 50/60 Hz. 

Software Requirements

The following is required to run the handset and repeater installation and maintenance tools.

OS: Windows XP or newer

Before you start the installation you need to find the following information and perform the 
following tasks:

 

Ensure that a site survey and deployment have been conducted and that the installer has 
access to these plans before proceeding any further. For more information about deployment, 
refer to the Deployment Guide that comes with the Deployment Kit.