Auerswald COMfortel WS-650 IP 90150 Benutzerhandbuch
Produktcode
90150
Spectralink IP-DECT Server 6500 Installation and Configuration Guide
14215700 Version 3.0
June, 2013
June, 2013
43
Figure 20
Adm. Page WS: Configuration/General page
2
Click Use Static IP Address.
3
In the IP Addr field, type the IP address of the Spectralink IP-DECT Server 6500.
4
In the Netmask field, type a new network mask.
Contact your system administrator for more information.
5
In the Gateway field, type the IP address of the default gateway.
The default gateway serves as an access point to another network.
Contact your system administrator for more information.
6
In the MTU field (Maximum Translation Unit), type the size of the largest packet, that your
network protocol can transmit (optional).
network protocol can transmit (optional).
7
In the Domain field, type the domain name of the system (optional).
8
In the Server field (under DNS - Domain Name System), type the IP address of the DNS
server (optional).
server (optional).
9
In the Server field (under NTP - Network Time Protocol), type the IP address of the NTP
server from which the system will obtain the current time.
server from which the system will obtain the current time.
10
From the Time Zone list, select the wanted time zone.
11
Click Save to save your general configuration data.
Wireless Server Configuration
On the Configuration/Wireless Server page you configure the Spectralink IP-DECT Server 6500
to allow subscription. If the system does not allow subscription, it is not possible to subscribe a
handset.
to allow subscription. If the system does not allow subscription, it is not possible to subscribe a
handset.
1
Click Configuration, and then click Wireless Server.