Auerswald COMfortel WS-650 IP 90150 Benutzerhandbuch
Produktcode
90150
Commissioning
COMfortel WS-650 IP - Setup V02 04/2014
27
The LED on the front cover flashes red followed by a
steady green if the COMfortel WS-650 IP has been con-
figured.
steady green if the COMfortel WS-650 IP has been con-
figured.
Opening the Configuration Manager
Requirements
–
Existing network connection between the PC and the
COMfortel WS-650 IP
COMfortel WS-650 IP
–
Knowledge of the COMfortel WS-650 IP's IP address
Note:
If a DHCP server is set up in the local network, the COMfortel
WS-650 IP will get its IP address from this DHCP server. You can
determine the IP addresses either via the DHCP server and the
COMfortel WS-650 IP's MAC address or via UPnP.
WS-650 IP will get its IP address from this DHCP server. You can
determine the IP addresses either via the DHCP server and the
COMfortel WS-650 IP's MAC address or via UPnP.
If no DHCP server has been set up, the static IP address
192.168.0.1 and the network mask 255.255.255.0 are used
instead after a waiting time of approx. 1.5 minutes.
192.168.0.1 and the network mask 255.255.255.0 are used
instead after a waiting time of approx. 1.5 minutes.
–
Knowledge of the access data (factory settings):
쐽
User name: admin
쐽
Password: admin (password before firmware version 14A:
ip6000)
ip6000)
1.
Start a browser (e.g. Mozilla Firefox).
2.
Enter the COMfortel WS-650 IP's IP address (e.g.
http://
192.168.0.1
) in the browser's Address bar.
3.
Enter the user name in the User name entry field.
4.
Enter the password in the Password entry field.
5.
Click OK.
The Configuration Manager opens.
Configuring the COMfortel WS-650 IP
Requirements
–
PBX with the following features:
쐽
available internal VoIP channels
COMfortel_WS650IP_Setup_V02_04_2014_de_en.book Seite 27 Montag, 7. April 2014 10:26 10