Auerswald COMfortel 3500 90562 Benutzerhandbuch
Produktcode
90562
Commissioning
52
COMfortel 3500 - Firmware Version 1.2B - Commissioning Instructions 02 07/12
Tip: By tapping the entry field, you can fade in the Android keyboard on the
display. If you press the Back key, the Android keyboard will be faded out,
once more.
display. If you press the Back key, the Android keyboard will be faded out,
once more.
10.
Tap on OK.
11.
Tap on Default account (standard).
Hinweis: If SIPS/SRTP is switched on in the PBX, the system opens a
dialogue in which you enter the fingerprint. Enter the fingerprint, and then
tap on OK.
dialogue in which you enter the fingerprint. Enter the fingerprint, and then
tap on OK.
The telephone logs on to the PBX. If the registration is performed suc-
cessfully, a corresponding message will be displayed. The telephone is
now ready for use.
cessfully, a corresponding message will be displayed. The telephone is
now ready for use.
12.
Press the Home key to leave the setup assistant.
Further Steps
쑱
Configure the telephone according to your requirements. You can carry out
the configuration either via the display on the telephone (see the configura-
tion and operating manual) or via the integrated configuration manager
(recommended; see
the configuration either via the display on the telephone (see the configura-
tion and operating manual) or via the integrated configuration manager
(recommended; see
쑱
If necessary, carry out a firmware update in order to extend the telephone
with the newly available functions (see
with the newly available functions (see
). Information about new
features is available on the support pages at the Auerswald website (Inter-
net address: www.auerswald.de).
net address: www.auerswald.de).
Configuring Network Settings Manually
Requirements
– Message Faulty network setup which is shown on the display during com-
missioning
Steps to Take
1.
Tap on Faulty network setup.
The Settings > Network application will be opened.
2.
Tap on DHCP.
DHCP is switched off.