Auerswald COMfortel 3500 90562 Benutzerhandbuch
Produktcode
90562
Commissioning
COMfortel 3500 - Firmware Version 1.2B - Commissioning Instructions 02 07/12
55
Manually Creating and Configuring a Standard VoIP Account for
an Auerswald PBX
an Auerswald PBX
Requirements
– Auerswald PBX COMmander 6000/R/RX, COMmander Business, COM-
mander Basic.2, COMpact 3000 analog/ISDN/VoIP, COMpact 5010 VoIP,
or COMpact 5020 VoIP with the following features:
or COMpact 5020 VoIP with the following features:
쐽
Available internal VoIP channels
쐽
Switched on (connected to the 230 V mains supply)
쐽
Internal telephone number entered in the configuration with PIN and
password (COMpact 3000 only PIN) for the telephone
password (COMpact 3000 only PIN) for the telephone
Steps to Take
1.
Start the “Settings” application (All apps > Settings or Manual setup from
the setup assistant).
the setup assistant).
2.
Tap on Providers & exchange systems.
3.
Tap on New provider/exchange system.
4.
Tap on auerswald.xml.
5.
Tap Domain.
6.
Enter the IP address of the PBX.
Tip: By tapping the entry field, you can fade in the Android keyboard on the
display. If you press the Back key, the Android keyboard will be faded out,
once more.
display. If you press the Back key, the Android keyboard will be faded out,
once more.
7.
Tap on OK.
8.
Tap on Registrar.
9.
Tap on Registrar address.
10.
Enter the IP address of the PBX.
11.
Tap on OK.
12.
Press the Back key three times to leave the settings for providers.
13.
Tap on Accounts.
14.
Tap on New account.
15.
Tap on Providers & exchange systems.