Auerswald COMfortel 3500 90561 Benutzerhandbuch

Produktcode
90561
Seite von 76
Important Information
COMfortel 3500 - Firmware Version 1.2B - Commissioning Instructions 02 07/12
39
Information on the Power Supply for the Telephone
A wall-mounted power supply type no. FW7577/EU/40 with 40 V and 350 mA is
contained in the scope of delivery. Please note the following special features
with regard to the power supply of the telephone:
The power supply for the telephone can either be provided via the deliv-
ered wall-mounted power supply or – if your active network component 
(switch or router) supports this – via Power over Ethernet (PoE).
The power supply for telephones with a single key extension module can 
be provided via the delivered wall-mounted power supply.
For telephones with two or more key extension modules, either two 
power supply units or Power over Ethernet and one power supply are 
required.
Important: If power is being supplied using Power over Ethernet, the
bridge plug must not be removed from the socket on the bottom of the
telephone, which is labelled with 
.
Possible Number of System Telephones on Auerswald PBXs
Data for Connecting a Headset
PBX
Max. number of COMfortel 3500 if the PBX has been 
fully extended
COMpact 5010 VoIP
4
COMpact 5020 VoIP
8
COMmander Basic.2 (19")
24
COMmander Business (19")
64
COMmander 6000/R/RX
64 (112)*
* With over-commitment, more subscribers are possible per VoIP channel.
COMmander 6000/R/RX
112
Microphone power consumption
Max. 0.5 mA
Microphone sensitivity
45 dB
Loudspeaker impedance
150 Ohm