Friedland D931 S Wireless Bell 200018 Benutzerhandbuch

4

A ‘beep’ sound is heard in learn mode…
¬

●

The push you are programming has already been learnt by the chime.

¬

●

If you want to change the icon associated with the push, use the un-learn procedure, then
programme the push again.

Two ‘beep’ sounds are heard after the normal chime sound…
¬

●

This indicates a low battery in the bell push that activated the chime. Fit a new battery, type CR2032.

When the bell push is operated, the amber confidence light does not turn on, or is only 
on for a short time…
¬

●

In normal operation, the amber light will turn on for 1 second. When the battery is weak,
the light will only turn on for a short time. Fit a new battery, type CR2032.

●

Check that the batteries are the correct type. 

●

Check that the batteries are fitted correctly.

●

The chime could be out of range of the bell push. Try the chime in a different location.

●

The chime might not have learnt the identity of the bell push. Follow the programming procedure.

●

Check that the volume control is not at the minimum setting.

●

Metal structures, including uPVC door frames can reduce the range of the product. 

Avoid mounting the push or chime on or near metal structures.

●

Other equipment can cause radio interference that affects your chime.

●

Walls and ceilings will reduce the range.

●

Weak batteries will reduce range. Replace every 12 –18 months. In cold conditions (below 5ºC), 

batteries may need to be replaced more often.

●

Libra + is not compatible with the earlier Libra system.

●

Only use accessories marked Libra +.