AEG Red, Multi-coloured CD, CD-R, CD-RW 400624 Datenbogen

8  PROGRAM button (CD programming)
9  REPEAT button (Repeat mode)
10  OFF.VOL. control (volume)
11  MIC VOL control (microphone volume)
12  CD compartment
13  OPEN – catch for opening the CD compartment
14  Indicator lamp PROGRAM 
15  Indicator lamp REPEAT 
16  LED display

Back (not shown)

 HEADPHONE – Headphone jack

DC 6 V jack
Speaker
Battery compartment

Location
Select an appropriate location for the device, e.g. a dry, flat, 
non-slip surface on which the device can be easily operated.

Inserting the Batteries (not supplied)
1.  Open the lid of the battery compartment on the back by 

releasing the screw on the battery compartment with a 
screwdriver and then removing the lid.

2.  Insert 4 batteries of type UM2/R14 1.5 V. Please ensure 

that the polarity is correct (see the inside of the battery 
compartment)! 

3.  Close the battery compartment again and tighten the 

screw.

When the batteries are flat an “E” is shown in the display. In 
this case please replace the complete set of batteries by new 
ones.

CAUTION: 
•  The batteries shall not be exposed to excessive heat 

such as sunshine, fire or the like. 

•  Batteries can leak and lose battery acid. If the device is 

not used for long periods of time, remove the batteries.

•  Non-rechargeable batteries may not be charged.
•  Chargeable batteries may only be recharged under the 

supervision of an adult.

•  Chargeable batteries must be removed from the toy 

before they are charged.

•  Different battery types or new and used batteries must 

not be used together.

•  Batteries must be inserted with the correct polarity.
•  Spent batteries must be removed from the toy.
•  Batteries are not to be disposed of together with 

domestic wastes. Dispose of the used batteries at the 
relevant collection bin or at your dealer’s.

•  The terminals may not be short-circuited.

Operation with a Power Pack (not supplied)
•  Make sure that the mains voltage and the polarity of the 

power supply correspond with the information on the 
type label of the device.

•  Insert the power pack into the 6 V DC / 5 W connection 

provided and then into a correctly installed power socket.

Transport Safety Device, CD Compartment
•  Please open the CD compartment by folding open the 

CD compartment lid to the front.

•  Before operating the machine for the first time, remove 

the transport safety device from the CD player if it is still 
in place.

Headphone Socket
If you want to listen on headphones you should use head-
phones with a 3.5 mm jack plug inserted into the   HEAD-
PHONE socket. The loudspeakers are switched off.

Switching On/Off
Switch the device on by turning the volume control in a 
clockwise direction and then adjusting the volume to the 
desired level. To switch the device off, turn the control to the 
left until it is heard to click into place. Then remove the mains 
plug. You should also take out the batteries if the device is 
not going to be used for a prolonged period.

1.  Open the CD compartment by folding open the CD 

compartment lid to the front.

2.  Set a CD onto the centering spindle with the printed side 

facing upwards, so that the CD mechanically latches into 
place. Then close the CD compartment lid. “- -” appears 
in the display followed by the number of tracks. Press the 
PLAY/PAUSE button in order to play the CD. The CD will 
play from the first title.

3.  With F.SKIP you can jump to the next or next-but-one 

track etc. If the button is held down, the music search 
starts.

4.  The B.SKIP button can be used as follows:

Press once             = the current track is repeated from 

the beginning.

Press twice            = jumps to the previous track.
Press three times = plays one track before that etc. If 

the button is held down, the music 
search starts.

5.  In order to remove a CD, please press the STOP button, 

open the CD compartment and lift the CD out carefully.

Always keep the CD deck closed.