Sony BDV-N5200W BDVN5200WB Datenbogen

48

GB

BDV-N9200W/BDV-N9200WL/BDV-N7200W/BDV-N7200WL/BDV-N5200W

4-485-800-13(1)

D:\NORM'S JOB\SONY HA\SO140001\BDV-N9200_7200_5200_E3200 
(PMRF 02)\4485800131_GB (CEK)\080OTH.fm

masterpage: Left

6

Press B/b to select [OK] or 
[Cancel], then press 

7

Press V/v to select the item, then 
press .

8

Press V/v to adjust the parameter.

9

Press B/b and 

settings.
Check the following settings.

x

[On]: The center speaker is connected.
[Off]: The center speaker is not 
connected.

x

When you move the speakers, be sure 
to set the parameters of the distance 
from the listening position to the 
speakers.
You can set the parameters from 0.0 to 
7.0 meters.

[Front Left/Right] 3.0 m: Set the front 
speaker distance.
[Centre] 3.0 m: Set the center speaker 
distance. This setting is only available 
when [Centre Speaker] is set to [On].
[Surround Left/Right] 3.0 m: Set the 
surround speaker distance.
[Subwoofer] 3.0 m: Set the subwoofer 
distance.

x

You can adjust the sound level of the 
speakers. You can set the parameters 
from –6.0 dB to +6.0 dB. Be sure to set 
[Test Tone] to [On] for easy adjustment.

[Front Left/Right] 0.0 dB: Set the front 
speaker level.
[Centre] 0.0 dB: Set the center speaker 
level. This setting is only available when 
[Centre Speaker] is set to [On].
[Surround Left/Right] 0.0 dB: Set the 
surround speaker level.

[Subwoofer] 0.0 dB: Set the subwoofer 
level.

x

BDV-N9200WL/BDV-N7200W/
BDV-N7200WL only)
You can correct the speaker position 
virtually to improve the surround effect.

[On]: You can hear sound from a 
virtually relocated speaker position 
determined by [Auto Calibration].
[Off]: You can hear sound from the 
actual speaker position.

• This setting is only reflected after 

performing [Auto Calibration].

• You cannot select this function when the 

speaker layout is set to [All Front].

x

The speakers will emit a test tone to 
adjust [Level].

[Off]: The test tone is not emitted from 
the speakers.
[On]: The test tone is emitted from each 
speaker in sequence while adjusting 
level. When you select one of the 
[Speaker Settings] items, the test tone is 
emitted from each speaker in sequence.
Adjust the sound level as follows.

1

Set [Test Tone] to [On].

2

Press V/v to select [Level], then press 

.

3

Press V/v to select the speaker type 
you want, then press 

.

4

Press B/b to select the left or right 
speaker, then press V/v to adjust the 
level.

5

Press .

6

Repeat Steps 3 to 5.