Lg Electronics BP730 Blu-Ray Player BP730 Datenbogen

22

S

ys

tem  Se

tting

When you turn on the unit for the first time, the 
initial setup wizard appears on the screen. Set the 
display language and network settings on the initial 
setup wizard.
1. Press 1 (POWER). 

The initial setup wizard appears on the screen.

2. Use w/s/a/d to select a display language 

and press Wheel (

).

3.  Try the some features of your Magic remote 

control by following the guide on the screen.

4.  Read and prepare the preparations for the 

network settings and then press Wheel ( ) 
while [Start] is highlighted.

If wired network is connected, the network 
connection setting will automatically be 
finished.

5.  All available networks are displayed on the 

screen. Use w/s to select [Wired Network] 

or desired SSID of wireless network and press 
Wheel ( ).

If you have security on your access point, you 
need to input the security code as necessary.

6. Use w/s/a/d to select the IP mode 

between [Dynamic] and [Static]. 
Normally, select [Dynamic] to allocate an IP 
address automatically.

7.  Select [Next] and press Wheel ( ) to apply 

network settings.

Network connection status is displayed on the 
screen.
For details on network settings, refer to 
“Connecting to your Home Network” on page 
17.

8.   Check all the settings that you have set in the 

previous steps.

Press Wheel ( ) while [Finish] is highlighted 
to finish the initial setup settings. If there is any 
settings to be changed, use w/s/a/d to 

select 1 and press Wheel ( ).